Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Thread Tools Search this Thread

Old 11-10-2016, 12:30 AM
2wdMuddin 2wdMuddin is offline
Ford Ranger Driver
Join Date: Mar 2013
Posts: 562
Default Replacement dust boots for upper control arms?

So I bought fabtech uppers and camburg coils for a little over 100 dollars. The balljoints are moog, are solid, but don't have dust boots on them. Are there any replacement boots for these or do I have to just replace the whole ball joint. I don't really want to dish out for a brand new bj when the current ones have no play and just need the boot. Or who out there just doesn't have a boot and runs it exposed? I know those btf's are completely open
2005 XL 2.3 (duratec), 15x8 American Racing Baja wheels, BFGoodrich 32x11.50 all terrains, 4.10 open diffs, CB/PA, ORI Baja Eliminator Lightbar(sold), Hella 500 Foglights, Fabtech upper control arms, camburg coil springs, Maxtrac "4" inch spindles and shackles, 32 inch Bfgoodrich AT's, Spyder Halo Headlights, custom rear tube bumper with integrated hitch, custom front prerunner bumper with skidplate, roadrunner fiberglass front fenders, pulled bedsides
Reply With Quote

ball, joints, replacement, uca

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
Different upper control arms? 01_edge_4x4 Suspension Tech 5 03-29-2015 12:37 AM
upper control arms stickdude22 Suspension Tech 10 01-21-2015 06:54 PM
upper control arms wingnutt Suspension Tech 7 08-28-2014 04:21 PM
Do i need new upper control arms *HELP* Deens_Ranger Suspension Tech 8 12-31-2013 11:15 PM
Want to Buy: Upper Control Arms jake_the_clark Suspension Parts 0 03-19-2013 08:33 PM