Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Thread Tools Search this Thread

Old 06-27-2010, 08:25 PM
Jp7 Jp7 is offline
Join Date: Dec 2009
Posts: 1,451
Default Tail Light dissasembly for 2001-2005 Tails - *pics*

For the last few days I've been getting really itchy about the idea of doing a complete LED retrofit in my 2003. I have a few spare tail lights sitting around and I tried to disassemble the lens from the housing. First I used a dremel and cut underneath the edge where I had thought the tail light was plastic-welded to the lens. The idea was to get behind it and close to the seam so that the cut could not be seen once the retrofit was finished and glued back together. The problem I ran into was that the areas around the outer screw-holes were glued also (which makes sense because that requires an extra seal), so I learned that I should have cut on the inside portion of this area. This is easy near the bottom because there is a reflector that you can't see through. The bottom is basically hidden from anything showing. The hard part is the top, because the clear reverse-lamp portion is there, and any error will totally show through. When I got it apart I realized that the entire lamp is NOT plastic welded- it is glued in. Right away I thought I would try the "baking in the oven" trick to get it apart. I put the lens in my pizza-oven, set it to 250 and let it go for about 10 minutes. I was just going to see if the glue would get soft, or if the lens would start to sag first. After coming back 10 minutes later, the lens had sagged badly while the glue remained completely solid. I don't know if this is because my oven is small and barely fit the tail light though, because the lens was almost near the heating element and possibly could have been exposed to higher temperatures because of this.

I think I need a better dremel or cutting tool to do more accurate cuts. The ranger has very curvy lines where you need to cut it to get it apart. I've cut apart Mitsubishi Evo tails, which are indeed sonic welded, and much easier lines to cut apart.

I plan on doing a retrofit like this to my rangers (both of them): I just need a good tool and a reliable way of safety getting the tail lights apart.

Looking for a professional retrofitter to add HIDs or LEDs to your Ranger? PM me if your looking to have work done, and have cash to spend.

Originally Posted by FireRanger View Post
I'm dying to see this at night. Someone go tell the sun to give up already.
Originally Posted by beef08 View Post
Your the man, you bring our dreams to a reality within the lighting spectrum
Originally Posted by BCobe View Post
Jp7 you always do AMAZING work! Hats off to you sir
Originally Posted by FireRanger View Post
People so often confuse "hating" with "knowing better".
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
For Sale: Magnaflow, Headlight, Tail Light, Sub Box, F150 Tails drewglenn04 Exterior Parts 26 10-20-2013 10:22 PM
Few pics from today (new tails and window decals) SaskRanger Vehicle Snapshots 10 07-03-2010 08:00 AM
For Sale: 2005 OEM Tails, will fit 93+ RangerJustin Exterior Parts 14 02-15-2010 08:02 AM
For Sale: FS: 2005 Tail Lights (Ontario, Canada) Lazler Exterior Parts 3 02-12-2010 12:47 PM
[SOLD] CHEAP 3" Performance Accessories body lift 2001-2005 STL Suspension Parts 2 01-24-2010 08:06 PM