HID Fogs - Ballast mount
OK so I got my hid fogs installed... Stil not sure they are done properly but they work. Mine came from ddm and had a different setup then my 907 heads. Basically each light had a pos. and neg. wire.
I just stuck these in the plug that came off when i removed the original fogs... Is this how you have done yours?
Also has anyone had any luck using the double sided tape? Think i want to zip tie but still not sure where...
__________________
2006 Ranger FX4 Level 2
33x12.5 Hankook Dynamic M/T, Ion Aluminum Alloy 15x10 -4inch offset,Front winch bumper, superwinch ep9.0, 3" B/L, Torsion Crank, Chrome Bed Bar, 2 x 100 watt offroads, 6000k HID Heads/Fog(s), Pioneer H.U., 12" Jackhammer, Alpine mrp 500,train horn, whelen pa/siren
Mods
Headlight, Fog, Airbox, Blue led interior(not gauge cluster yet), blue led l/p, blue led side markers, color match skid plates
To come
sliders, suspension lift, rear bumper, tire carrier, tailgate
|