Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 06-04-2010, 12:00 PM
thumper4fun thumper4fun is offline
Learning to use the forums
 
Join Date: Mar 2010
Posts: 9
Default Need Honeycomb Facelift Help

Want to upgrade my '01 2wd XLT to a '01-'03 4wd honeycomb grill and lower valance with fog lights.

How do I get from this?
stock front end.jpg
To this?
honeycomb front end.jpg

Can I just buy a honeycomb grill insert or do I have to buy the complete grill assembly? And where is the best place to pick up the lower valance?

Last edited by thumper4fun; 06-04-2010 at 12:02 PM.
Reply With Quote
  #2  
Old 06-04-2010, 12:15 PM
STL STL is offline
...............

 
Join Date: May 2009
Posts: 23,398
Default Re: Need Honeycomb Facelift Help

gotta get the whole grille

You will also need the upper bumper along with lower valance

check ebay, certifit.com or car-part.com


2wd valamce and 4wd valance are diffrent. that is why u need upper bumper as well
__________________
2005 Edge

Reply With Quote
  #3  
Old 06-04-2010, 12:34 PM
thumper4fun thumper4fun is offline
Learning to use the forums
 
Join Date: Mar 2010
Posts: 9
Default Re: Need Honeycomb Facelift Help

What years will work? '01-'03 4wd & Edge?

Also, can I do just the honeycomb grill without the upper bumper and lower valance?

Last edited by thumper4fun; 06-04-2010 at 12:41 PM.
Reply With Quote
  #4  
Old 06-04-2010, 12:43 PM
STL STL is offline
...............

 
Join Date: May 2009
Posts: 23,398
Default Re: Need Honeycomb Facelift Help

grille will b 01~03 fx4 or edge

bumper anything 01-03 4wd the edge came with painted to maych bumpers
__________________
2005 Edge

Reply With Quote
  #5  
Old 06-04-2010, 12:45 PM
LayBaks402 LayBaks402 is offline
DATTA PEPPAH!
 
Join Date: Jan 2010
Posts: 70
Default Re: Need Honeycomb Facelift Help

LMC truck
__________________
2006 Supercab XLT Ranger Manual Trans 4X4 8.8 4.10's Open 33x12.5x15 BFG AT's Cragar Soft 8 3" Summit B/L Add A Leaf T-bar Crank w/ Camber Kit Blacked Out Headlights 4.0 SOHC Hood Decal from STL
Reply With Quote
  #6  
Old 06-04-2010, 01:01 PM
thumper4fun thumper4fun is offline
Learning to use the forums
 
Join Date: Mar 2010
Posts: 9
Default Re: Need Honeycomb Facelift Help

I may do it in stages. Find a grill first and then do the bumper and valance later on. Thanks for your help!

Quote:
Originally Posted by STL View Post
grille will b 01~03 fx4 or edge

bumper anything 01-03 4wd the edge came with painted to maych bumpers
Reply With Quote
  #7  
Old 06-04-2010, 01:08 PM
STL STL is offline
...............

 
Join Date: May 2009
Posts: 23,398
Default Re: Need Honeycomb Facelift Help

lmc truck is expensive and the dhipping on large items is high
__________________
2005 Edge

Reply With Quote
  #8  
Old 06-04-2010, 01:55 PM
STL STL is offline
...............

 
Join Date: May 2009
Posts: 23,398
Default Re: Need Honeycomb Facelift Help

Quote:
Originally Posted by thumper4fun View Post

Also, can I do just the honeycomb grill without the upper bumper and lower valance?
You can swap grilles without having to do the bumper
__________________
2005 Edge

Reply With Quote
  #9  
Old 06-05-2010, 06:13 AM
thumper4fun thumper4fun is offline
Learning to use the forums
 
Join Date: Mar 2010
Posts: 9
Default Re: Need Honeycomb Facelift Help

This may be a dumb question, but can I put lights in the cutouts of my current valance? It looks like the valance was designed to have fog/running lights.
Reply With Quote
  #10  
Old 06-05-2010, 06:22 AM
STL STL is offline
...............

 
Join Date: May 2009
Posts: 23,398
Default Re: Need Honeycomb Facelift Help

You would have to cut them out. I dont believe they pop out.

If you did run fog lights you would have to wire it in.

You more than likely have fog light connectors at the bumper. They run to the dist. box under the hood. Ford did that save and make 1 wire harness. Only thing you will be missing is the fog light switch at the radio bezel and wiring from switch to dist. box. and the relay at the dist. box
__________________
2005 Edge

Reply With Quote
  #11  
Old 06-05-2010, 05:16 PM
TurdFX4 TurdFX4 is offline
Sept. 2011 TOTM
 
Join Date: Jan 2010
Posts: 1,771
Default Re: Need Honeycomb Facelift Help

Quote:
Originally Posted by LayBaks402 View Post
LMC truck
X2! but stl is right, they rape you on shipping
Reply With Quote
  #12  
Old 06-05-2010, 07:01 PM
STL STL is offline
...............

 
Join Date: May 2009
Posts: 23,398
Default Re: Need Honeycomb Facelift Help

Ran the parts needed through LMC

$129.95 Grille + $20.00 over sized item charge
$129.95 Chrome Bumper + 20.00 over sized item charge
$99.95 Valance + $20.00 over sized item charge

Parts Total: $359.85
Delivery & Handling: $34.75
OVERSIZE: $60.00
Order Total:$ 454.60


Certifit.com

Grille $34.75
Bumper $75.75
Valance $61.75
Total $172.25


The only deal with certifit they dont deliver to homes. Or send through UPS
Delivery is available to commercial automotive businesses only.
Extended delivery to the following locations: Within 200 Miles of Store location

If you went certifit I am sure you could find a member to help ya out.
__________________
2005 Edge

Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Want to Buy: 02 Honeycomb grille crowbah Exterior Parts 8 05-04-2010 11:51 AM
Marker light facelift Harleymedic53 Vehicle Snapshots 15 03-04-2010 11:45 AM
Audible Odyssey's 99 Facelift Smokey Project Logs 13 03-02-2010 06:37 AM
Want to Buy: honeycomb grill DangaRanger Exterior Parts 2 02-10-2010 03:43 PM
Gave my ranger a bit of a facelift MattFetters Vehicle Snapshots 14 01-11-2010 05:43 PM