Hey guys, in the market for a soft tonneau cover for my Ranger..come across a few possible ones, but nothing that really jumps out at me..what kind do yall have and/or recommend? Id prefer the style that rolls all the way up, and gives you easy access to the entire bed. suggestions? pics are always good too! thanks!

__________________
2003 Ford Ranger XLT 3.0L V6, auto, electric everything..work in progress.

mods: 4" wNp spindles, 2" shackles, 2" blocks, 31s.

i love the tri fold on my F150

had a roll up with snaps on my ranger..never again..unless its over 80* you wont get it back on

__________________
2021 F150 5.0 Screw

Past:18 F150 2.7, 16 F150 5.0, 14 F150 5.0, 07 F150 5.4, 03 Ranger 4.0

Master Certified Ford Parts / Warranty Admin

Not the biggest fan of trifolds, since so much is left up by the back window..yeah, i can imagine the snap style being a huge PITA lol

__________________
2003 Ford Ranger XLT 3.0L V6, auto, electric everything..work in progress.

mods: 4" wNp spindles, 2" shackles, 2" blocks, 31s.

and if you need the whole cover off with a trifold...2 thumb screws and 2 mins its off

__________________
2021 F150 5.0 Screw

Past:18 F150 2.7, 16 F150 5.0, 14 F150 5.0, 07 F150 5.4, 03 Ranger 4.0

Master Certified Ford Parts / Warranty Admin

My original dealer installed Lund is easy to take off. Just pop off the struts from the bed, lift up and away. Presto Change-O !

http://www.amazon.com/TonnoSport-22010109-Roll-Up-Cover-Ranger/dp/B002LGOHSM/ref=au_as_r?ie=UTF8&Make=Ford%7C54&Model=Ranger%7C696&Year=2003%7C2003&n=15684181&newVehicle=1&s=automotive&vehicleId=1&vehicleType=automotive
this one looks good, never heard of the brand though..

__________________
2003 Ford Ranger XLT 3.0L V6, auto, electric everything..work in progress.

mods: 4" wNp spindles, 2" shackles, 2" blocks, 31s.

I had an extang that lasted a long time. eBay.

__________________
MY BUILD THREAD
1999 MAZDA 2500SE, 2.5L 4-clanger, 5 speed, Green n slow. Rangers as daily drivers since 1988.
ASE Certified Mechanic, Builder of Show Destroying Protouring and Classic cars..

This. Also what I have on mine.

http://www.agricover.com/access/literider/

__________________
DD- 2002 Ranger 4x4 4.0

didnt realize how expensive these get..lol

__________________
2003 Ford Ranger XLT 3.0L V6, auto, electric everything..work in progress.

mods: 4" wNp spindles, 2" shackles, 2" blocks, 31s.

Where are you located? I have one off my 06 FX4 I'm trying to sell.

__________________
2006 Ford Ranger FX4 Off Road
maxed out torsion keys, Add a Leaf, 3" higher then stock, LT265/75R16 BF Goodrich all terrain KO2s on 16x8 Black Rock 997 Type 8 Wheels, 15% front windows, 5% back windows. Cobra 40 Channel CB and a 3' Firestik II, 3157 Pilot LED backup light bulbs and 2 KC Dayligher 100 Watt lights

Here is the one one my truck
TonnoPro 42-105 TonnoFold Black Trifold Truck Tonneau Cover https://www.amazon.com/dp/B003Z9YKRM..._VBLCub19HTQZQ

__________________
2011 Ranger XLT 4x4 3.73 8.8" Trac-lok #1 T-bars, K -springs, LineX bedliner, General Grabber AT2's, Tonnopro tri-fold, CoverKing Realtree AP seat covers, OEM pre-keys, axle spacers, Bilstein 4600's, Hellwig AAL. Ziebart Undercoat
'98 Ranger XLT 2WD (sold)

Here is a full soft leather one that was on my '04 when I purchased it. I currently use a canopy, but the guy who I bought the truck from way preferred the soft cover. He also had the tailgate alarmed. Personally, I would look used before buying new. These covers are super simple to install.

http://www.autoaccessoriesgarage.com...-Tonneau-Cover

__________________
2004 XLT Ext Cab 4.0 Auto 4x4

I've got two different tonneaus.
On the Ranger, I've got an Access Limited. It's been on there since the day I bought the truck new in 2004. Lifetime warranty. velcro closure, and still looks good. Zero problems with it.
On the 150, I've got a Truxedo QT LoPro. Same closure, velcro, and very low profile. Same warranty.
If I wanted, I could remove either one in just a couple minutes.
Both are high quality, seal up well, and no leaks. Easy to adjust tension on either one to keep it from ballooning when driving.
Both roll up and only take maybe the first few inches of the bed length, with very minimal width of the bed lost due to the rails and clamps.
Neither are cheap, quality usually isn't either.
Years ago, I had a snap down tonneau on my '99 Ranger, and like DJ said about snapping it down, I wouldn't recommend one, just spend the extra few bucks, and get a workable solution.

__________________
'04 Edge, Scab/flareside, 2wd, 3.0, 5 speed, 4:10 open. Billet grille, Raceline Raptor black wheels, 265/75/16 DuraTracs. Tbar crank, AAL. Fox shocks, Thrush welded SI/DO swept back side exit. Morimoto projectors, '06 tails and power mirrors. LEDs all the way around. Blacked out fender badge. Access Limited rollup tonneau. 5% tint on back three windows. Airbox mod, FWIW. And a Border Collie that likes it too!!

South Carolina..pm me if you would possibly interested in working something out..

Thanks for the input from everyone!

__________________
2003 Ford Ranger XLT 3.0L V6, auto, electric everything..work in progress.

mods: 4" wNp spindles, 2" shackles, 2" blocks, 31s.

Lite-Rider tonno is worth considering since it is cheaper than other rollup covers out there.