Hi, sorry, was offline for a while... Here's a photo of the back of the passenger side fog lamp/valance. You can see the bolt at the bottom holding the Rigid dally lamp bracket to the valence. Also, once I trimmed a small piece of plastic (key) from the Rigid lamp connector, it plugged right in to my factory fog lamp connector. I put a zip tie there to hold the wires up, out of the way.Took me about an hour.

One more thing that I forgot, these lamps emit some sort of RF that interferes with the TPMS - after 45min of driving with these lamps on, my TPMS warning will go on (the truck has lost contact with the sensors - 45min is the timeout) turning the lights off will result in the TPMS regaining contact and the warning going out. One day, I'll add a ground connection from the lamp mounting bracket to maybe prevent this... The lamps are mounted to the plastic valance right now...

__________________
2011 Supercab Sport 4x4, 4.0L, Auto, 3.73LS.

Richard, how far in did you drill the hole for the mounting bracket?

Thanks Richard, just saw this. This just might be on my to do list.

__________________
'04 Edge, Scab/flareside, 2wd, 3.0, 5 speed, 4:10 open. Billet grille, Raceline Raptor black wheels, 265/75/16 DuraTracs. Tbar crank, AAL. Fox shocks, Thrush welded SI/DO swept back side exit. Morimoto projectors, '06 tails and power mirrors. LEDs all the way around. Blacked out fender badge. Access Limited rollup tonneau. 5% tint on back three windows. Airbox mod, FWIW. And a Border Collie that likes it too!!

Do any of you guys know if any other brand of led cubes will just plug right in like the rigid ones?

__________________
2004 ranger edge single cab. 3.0 v6. 5 speed

How did you get a drill up in there to drill the hole? The very bottom of my valence gets in my way