Hi, sorry, was offline for a while... Here's a photo of the back of the passenger side fog lamp/valance. You can see the bolt at the bottom holding the Rigid dally lamp bracket to the valence. Also, once I trimmed a small piece of plastic (key) from the Rigid lamp connector, it plugged right in to my factory fog lamp connector. I put a zip tie there to hold the wires up, out of the way.Took me about an hour.
One more thing that I forgot, these lamps emit some sort of RF that interferes with the TPMS - after 45min of driving with these lamps on, my TPMS warning will go on (the truck has lost contact with the sensors - 45min is the timeout) turning the lights off will result in the TPMS regaining contact and the warning going out. One day, I'll add a ground connection from the lamp mounting bracket to maybe prevent this... The lamps are mounted to the plastic valance right now...