|
|
|
|
09-16-2012, 04:12 PM
|
|
<-- PAID OFF!
|
|
Join Date: May 2011
Posts: 3,044
|
|
OEM Ranger skid plate (SoCal)
I have a stock OEM 4x4/edge skid plate I was hoping to modify to fit my 2wd XLT, but since that turned out to be to much of a hassle its just sitting in my garage. Structurally its fine, there isn't much of the original paint (a can of spray paint and your good to go), and it does have a TINY bit of surface rust. Its literally been sitting in a garage for years by the original owner who went LT and could no longer use it.... which is where I picked it up and in turn placed it in my garage haha.
Im asking $125, local pickup in Temecula only.
* No hardware to go with it, but a simple trip to the hardware store would remedy that problem for under $5.
*This will fit any 98-2011 edge/sport or 4x4 ranger without modification
__________________
2002 DWB Ford Ranger XLT 3.0 V6 FF 4 Door
3" Doetsch spindle lift, 2.5" Camburg CRS coil lift, BTF uniball UCA's, ORW limit straps
Shackles, blocks, custom leaf pack, Bilstein 5100's/5125's F/R
33" GoodYear MTR's, 8.8 swap with 4.56 gears and L/S
Baja Designs 20" OnX, HID converted Hella's
Quote:
Originally Posted by 87rangerSummers
He has a badass lifted 2wd. He is being a smartass
|
|
|
|
|
Register and never see these ads again. |
|
09-16-2012, 04:27 PM
|
|
Ford Tough
|
|
Join Date: Mar 2012
Posts: 273
|
|
So you won't ship this? At all?
|
09-16-2012, 04:33 PM
|
|
<-- PAID OFF!
|
|
Join Date: May 2011
Posts: 3,044
|
|
Re: OEM Ranger skid plate (SoCal)
shipping this sucker would be a major hassle, cost $, and in my experience the buyer will probably back out.
__________________
2002 DWB Ford Ranger XLT 3.0 V6 FF 4 Door
3" Doetsch spindle lift, 2.5" Camburg CRS coil lift, BTF uniball UCA's, ORW limit straps
Shackles, blocks, custom leaf pack, Bilstein 5100's/5125's F/R
33" GoodYear MTR's, 8.8 swap with 4.56 gears and L/S
Baja Designs 20" OnX, HID converted Hella's
Quote:
Originally Posted by 87rangerSummers
He has a badass lifted 2wd. He is being a smartass
|
|
09-27-2012, 11:08 PM
|
|
<-- PAID OFF!
|
|
Join Date: May 2011
Posts: 3,044
|
|
Re: OEM Ranger skid plate (SoCal)
Bump
__________________
2002 DWB Ford Ranger XLT 3.0 V6 FF 4 Door
3" Doetsch spindle lift, 2.5" Camburg CRS coil lift, BTF uniball UCA's, ORW limit straps
Shackles, blocks, custom leaf pack, Bilstein 5100's/5125's F/R
33" GoodYear MTR's, 8.8 swap with 4.56 gears and L/S
Baja Designs 20" OnX, HID converted Hella's
Quote:
Originally Posted by 87rangerSummers
He has a badass lifted 2wd. He is being a smartass
|
|
09-28-2012, 01:52 PM
|
|
mythical tater
|
|
Join Date: May 2009
Posts: 651
|
|
Re: OEM Ranger skid plate (SoCal)
If only you would ship. I need one...
__________________
2006 Ford Ranger FX4 Level II
torsion bar crank, 32x11.50R15's, DSG Alcoa's, S10 Blazer short OHC, black interior, Sonar projector headlights, taillight mod, Nightshades, hood/grille blackout, glasspack and resonator tip side exhaust, Xtang Blackmagic tonneau cover, THE original STX swap.
1986 Ford Bronco XLT
2013 Ford Focus SE
|
10-07-2012, 01:42 PM
|
|
<-- PAID OFF!
|
|
Join Date: May 2011
Posts: 3,044
|
|
Re: OEM Ranger skid plate (SoCal)
bump!
__________________
2002 DWB Ford Ranger XLT 3.0 V6 FF 4 Door
3" Doetsch spindle lift, 2.5" Camburg CRS coil lift, BTF uniball UCA's, ORW limit straps
Shackles, blocks, custom leaf pack, Bilstein 5100's/5125's F/R
33" GoodYear MTR's, 8.8 swap with 4.56 gears and L/S
Baja Designs 20" OnX, HID converted Hella's
Quote:
Originally Posted by 87rangerSummers
He has a badass lifted 2wd. He is being a smartass
|
|
10-13-2012, 03:34 PM
|
|
<-- PAID OFF!
|
|
Join Date: May 2011
Posts: 3,044
|
|
Re: OEM Ranger skid plate (SoCal)
up
__________________
2002 DWB Ford Ranger XLT 3.0 V6 FF 4 Door
3" Doetsch spindle lift, 2.5" Camburg CRS coil lift, BTF uniball UCA's, ORW limit straps
Shackles, blocks, custom leaf pack, Bilstein 5100's/5125's F/R
33" GoodYear MTR's, 8.8 swap with 4.56 gears and L/S
Baja Designs 20" OnX, HID converted Hella's
Quote:
Originally Posted by 87rangerSummers
He has a badass lifted 2wd. He is being a smartass
|
|
10-19-2012, 03:33 PM
|
|
<-- PAID OFF!
|
|
Join Date: May 2011
Posts: 3,044
|
|
Re: OEM Ranger skid plate (SoCal)
To the top!
__________________
2002 DWB Ford Ranger XLT 3.0 V6 FF 4 Door
3" Doetsch spindle lift, 2.5" Camburg CRS coil lift, BTF uniball UCA's, ORW limit straps
Shackles, blocks, custom leaf pack, Bilstein 5100's/5125's F/R
33" GoodYear MTR's, 8.8 swap with 4.56 gears and L/S
Baja Designs 20" OnX, HID converted Hella's
Quote:
Originally Posted by 87rangerSummers
He has a badass lifted 2wd. He is being a smartass
|
|
10-26-2012, 04:15 PM
|
|
<-- PAID OFF!
|
|
Join Date: May 2011
Posts: 3,044
|
|
Re: OEM Ranger skid plate (SoCal)
Bump, very rare item, will take $100 even.
__________________
2002 DWB Ford Ranger XLT 3.0 V6 FF 4 Door
3" Doetsch spindle lift, 2.5" Camburg CRS coil lift, BTF uniball UCA's, ORW limit straps
Shackles, blocks, custom leaf pack, Bilstein 5100's/5125's F/R
33" GoodYear MTR's, 8.8 swap with 4.56 gears and L/S
Baja Designs 20" OnX, HID converted Hella's
Quote:
Originally Posted by 87rangerSummers
He has a badass lifted 2wd. He is being a smartass
|
|
10-28-2012, 12:06 PM
|
|
Busted Knuckle University
|
|
Join Date: Oct 2010
Posts: 1,364
|
|
Re: OEM Ranger skid plate (SoCal)
If we weren't on opposite coasts I'd have already picked this up. I've had no luck finding one in my area lately.
__________________
2003 Mazda B4000 Dual Sport
spindles, shackles, 17" ATX wheels, 285/75R17 Toyos Click below Build thread
|
11-01-2012, 08:01 PM
|
|
<-- PAID OFF!
|
|
Join Date: May 2011
Posts: 3,044
|
|
Re: OEM Ranger skid plate (SoCal)
Quote:
Originally Posted by JTbeast
If we weren't on opposite coasts I'd have already picked this up. I've had no luck finding one in my area lately.
|
Ya its a very rare part.
/to the top
__________________
2002 DWB Ford Ranger XLT 3.0 V6 FF 4 Door
3" Doetsch spindle lift, 2.5" Camburg CRS coil lift, BTF uniball UCA's, ORW limit straps
Shackles, blocks, custom leaf pack, Bilstein 5100's/5125's F/R
33" GoodYear MTR's, 8.8 swap with 4.56 gears and L/S
Baja Designs 20" OnX, HID converted Hella's
Quote:
Originally Posted by 87rangerSummers
He has a badass lifted 2wd. He is being a smartass
|
|
12-01-2012, 01:57 PM
|
|
<-- PAID OFF!
|
|
Join Date: May 2011
Posts: 3,044
|
|
Re: OEM Ranger skid plate (SoCal)
Sold
__________________
2002 DWB Ford Ranger XLT 3.0 V6 FF 4 Door
3" Doetsch spindle lift, 2.5" Camburg CRS coil lift, BTF uniball UCA's, ORW limit straps
Shackles, blocks, custom leaf pack, Bilstein 5100's/5125's F/R
33" GoodYear MTR's, 8.8 swap with 4.56 gears and L/S
Baja Designs 20" OnX, HID converted Hella's
Quote:
Originally Posted by 87rangerSummers
He has a badass lifted 2wd. He is being a smartass
|
|
12-01-2012, 04:05 PM
|
|
Ford Tough
|
|
Join Date: Jan 2011
Posts: 283
|
|
I've got a stainless one on mine from factory. It's 2000 model. Rare or not?
__________________
2000 3.0 4by4 ext.cab
|
12-01-2012, 04:26 PM
|
|
<-- PAID OFF!
|
|
Join Date: May 2011
Posts: 3,044
|
|
Re: OEM Ranger skid plate (SoCal)
all of them are rare items because they are rarely sold used. Whether they are actually rare on rangers im not sure, but i've never seen one stock with a skid driving around here.
__________________
2002 DWB Ford Ranger XLT 3.0 V6 FF 4 Door
3" Doetsch spindle lift, 2.5" Camburg CRS coil lift, BTF uniball UCA's, ORW limit straps
Shackles, blocks, custom leaf pack, Bilstein 5100's/5125's F/R
33" GoodYear MTR's, 8.8 swap with 4.56 gears and L/S
Baja Designs 20" OnX, HID converted Hella's
Quote:
Originally Posted by 87rangerSummers
He has a badass lifted 2wd. He is being a smartass
|
|
Thread Tools |
Search this Thread |
|
|
|
|