I'm selling the internals of the 3rd brake light I've made. All you need is double sided sticky tape to install this into your existing stock 3rd brake light after you've dremmeled out the interior.

This light is much more vivid looking, brighter and colorful than the stock setup. Price is 25$. I have been selling LED products to RF member for years with great success and many happy customers.

Here is what I'm selling. The LED's already have a bracket attached: Makes it pretty easy to secure to the CHMSL.


Here is the result you should expect:


Here is your stock 3rd brake light dremmeled open (to fit the LED bars - you will have to do this


Here is what you will have when your done:



If you are interested in the tail light LEDs (L1224R) - they are also available - PM me.

__________________
Looking for a professional retrofitter to add HIDs or LEDs to your Ranger? PM me if your looking to have work done, and have cash to spend.

How much?

__________________
Sunny
2002 Ford Ranger Edge Flex Fuel 2wd
LED Crazy!
Complete Pioneer Audio setup
5000k HID Projector retrofit and 3000k Fogs
Achilles Desert Hawk 255/45/20 with 20'' rims
Looking for a professional retrofitter? Send me a message!

Price is 25$. I have been selling LED products to RF member for years with great success and many happy customers.

__________________
2001 ford ranger XLT/4.0 sohc./160,000
Mods:Cb/recon third brake light/air silencer mod/new door speakers and h/u / shorty console, 245-75-16 goodyear wrangler duratracs on rock crawler rims. hellas and 03 honeycomb grille.

EDGEMAN4.0 FOR PRESIDENT!!!!!!

Thanks.

__________________
Looking for a professional retrofitter to add HIDs or LEDs to your Ranger? PM me if your looking to have work done, and have cash to spend.

25 Shipped? Do you happen to have 5mm SMD Blue LED bulbs size 194 miniature wedge for the instrument cluster?

__________________
Sunny
2002 Ford Ranger Edge Flex Fuel 2wd
LED Crazy!
Complete Pioneer Audio setup
5000k HID Projector retrofit and 3000k Fogs
Achilles Desert Hawk 255/45/20 with 20'' rims
Looking for a professional retrofitter? Send me a message!

Yes, I'll do 25$ shipped for the circuit board (paypal). I have component LEDs for the cluster, these are much better than 194 replacements, but you will need to wire them up yourself.

__________________
Looking for a professional retrofitter to add HIDs or LEDs to your Ranger? PM me if your looking to have work done, and have cash to spend.

Sounds like a great idea, but do they turn clear when you turn on the dome light so you can see the bed?
And what do you mean you have to wire up the blue led's? i need new cluster bulbs because i only have one left that is not burned out lol

__________________

2003 | XLT | Extended Cab | V6 | 4x4 | 4.0L SOHC | 3 Inch Body Lift | Cranked T-Bars | TJM Wench Bumper | Blacked Out Heads | Fog Light Mod | Surround Delete Mod | Blinker Mod | Custom Center Console | OHC | Pacer Bullet Rims | 33x12.5 All Terrains | 1 Inch Wheel Spacers

This is for the "all red" 3rd brake light only.

__________________
Looking for a professional retrofitter to add HIDs or LEDs to your Ranger? PM me if your looking to have work done, and have cash to spend.

jp, these plug right into the stock harness right?

No you will have to solder them to your existing harness.

__________________
Looking for a professional retrofitter to add HIDs or LEDs to your Ranger? PM me if your looking to have work done, and have cash to spend.

Do u have the ones for the tails.. I might be intesred in them

Yes, click here:

http://www.fordrangerforum.com/class...-stock-il.html

You won't be disappointed. Read what other customers have to say.

__________________
Looking for a professional retrofitter to add HIDs or LEDs to your Ranger? PM me if your looking to have work done, and have cash to spend.

JP7,

I guess that I'm not quite clear on how you are attaching the LED strip to the light lens.

I see how you've cut out most of the light housing in order to provide clearance for the LED strip, but then you are saying to use double sided tape to hold the LED strip in place.

How is that going to work? The only way that I can see using the double sided tape in this case to to put some tape on the inside of the lens, then placing the LED strip in there, but in that case the tape would be blocking the light output of the LED strip, right?

How about holding the LED strip to the Light Lens with clear silicone. Wouldn't that work? At least that way you would be able to replace the LED strip if necessary by cutting the silicone, which would be a lot harder to do if you used an epoxy.

Mark

What kind of modding needs to happen for those rear LED's? Can you put it into Laymens terms? and how much is it for both the left and right side 2000 rear setup? Thanks

__________________
2000 White 2WD Ford Ranger, White Tonneau Cover
Replaced Headunit with an Alpine Stereo and Alpine 5X7's in front and 6X9's in back, 00' Explorer Leather Seats to Automatic. Black Headlight Covers, Black Headliner, Blk/Gry OHC, going energy efficient with LED's and HID's, got sound proofing foam @ a local manufacturer and insulated everything (no sound or road noise)

Hey my camper shell has a third blight. Interesting.

__________________
Cree Proverb

~Draw me not without reason, Sheath me not without honor~ 17th century swordmaker Gallegos

~1994 Ford Ranger 2.3L 4-Banger 217, 000+miles~