For Sale: Checking interest: Retrofitting services - Page 4

richarddhoward · #46 01-18-2012, 01:17 AM

So I can send you stock headlights for a third-gen, you'd put projectors in them and send them back to me? How much would that run me? I would like a better beam pattern for sure

DrIftKi7Vg · #47 01-18-2012, 01:22 AM

Quote:

Originally Posted by richarddhoward

So I can send you stock headlights for a third-gen, you'd put projectors in them and send them back to me? How much would that run me? I would like a better beam pattern for sure

PM me what type of projectors you want, how you want it to look and all that good stuff and I'll be able to give you a detail price.

DrIftKi7Vg · #48 01-19-2012, 09:33 PM

bump

Another Ranger · #49 01-22-2012, 09:56 PM

I'm interested in seeing what these look like. So, I'll be watching for your posted photos.

DrIftKi7Vg · #50 01-22-2012, 10:02 PM

Quote:

Originally Posted by Another Ranger

I'm interested in seeing what these look like. So, I'll be watching for your posted photos.

Please take a look at page two and three for pictures of my work. Thanks.

TrainedTiger · #51 01-22-2012, 10:12 PM

Hey DJ, can you please show yours lit up in all the stages(parking lights, low beams, high beams, etc.)

jumbo777 · #52 01-28-2012, 12:48 PM

Definitely interested!

----------

I am a bit green to the HID lighting (for now). I was going to get a kit (minus the projectors) installed on my 2008 Ranger. I read up on how putting HID conversion kits can improperly distribute the light and make oncoming drivers angry, not to mention attract the police. There are many aftermaket HID kits available, but nothing that includes the projectors. After extensive research, I am happy to find this forum where I have the option to do this properly. BTW, what HID kits are the best ones (not made in China) that will install with Jordon's retrofitting? Thanks!

DrIftKi7Vg · #53 01-28-2012, 01:12 PM

Quote:

Originally Posted by jumbo777

Definitely interested!

----------

I am a bit green to the HID lighting (for now). I was going to get a kit (minus the projectors) installed on my 2008 Ranger. I read up on how putting HID conversion kits can improperly distribute the light and make oncoming drivers angry, not to mention attract the police. There are many aftermaket HID kits available, but nothing that includes the projectors. After extensive research, I am happy to find this forum where I have the option to do this properly. BTW, what HID kits are the best ones (not made in China) that will install with Jordon's retrofitting? Thanks!

Best HID setup for the retrofit projectors are the ones sold on the TRS website. I do sell HID kits for those who are tight on money and cannot do a retrofit but my HID kits are not compatible with the retrofit projectors

jumbo777 · #54 01-28-2012, 08:24 PM

I wish you success in your business! Not too many people know about the proper way to do HID lighting or have the knowledge.

DrIftKi7Vg · #55 01-28-2012, 08:45 PM

Thank you sir

Logan03CO · #56 01-29-2012, 03:12 PM

Hmmm...I may be interested.

Any shots of the back of the headlights? Wondering how well you seal everything up for like the FX-R setup's. Also, how do you handle the aiming?

The more details you can get me the better...I'm very picky when it comes to my truck!

DrIftKi7Vg · #57 01-29-2012, 03:20 PM

Quote:

Originally Posted by Logan03CO

Hmmm...I may be interested.

Any shots of the back of the headlights? Wondering how well you seal everything up for like the FX-R setup's. Also, how do you handle the aiming?

I use JB weld so it has a permanent hold. Stays in place real well and for aiming, I drilled those holes to place in some screws to keep the projector in place. Then I placed the headlights on the truck and turn them on. I then use the bolts as my aiming guide and use them to tweak the projectors up or down, left to right to get the aiming and the cutoff straight and perfect! I then tighten it up and use some black RTV silicone to keep the bolt in place (so it won't loosen up over time). For the back, I now use rubber caps to give it a nice clean look on the backside instead of seeing all that jb weld

.

96underconstruction · #58 02-09-2012, 12:23 PM

How much for u to do this for.my 96

DrIftKi7Vg · #59 02-09-2012, 01:14 PM

Quote:

Originally Posted by 96underconstruction

How much for u to do this for.my 96

PM sending...

djfllmn · #60 02-09-2012, 04:13 PM

Quote:

Originally Posted by TrainedTiger

Hey DJ, can you please show yours lit up in all the stages(parking lights, low beams, high beams, etc.)

check my thread out and all the pics are in there