A friend is selling some Hella 500FF's lights with 100W bulbs in them currently and a set of 55W standard and 100W xenon on the side. They have minimal use (tried making a light bar for his Pathfinder and he didn't really see the use so he took them off). He's asking 55$+shipping.
This is one set, does not have wiring, and does have stone shields and a relay. (talked to him he does have a relay with it)

You should probably put if they are Fog (flood) or Spot (distance pencil beam)

__________________

I honestly don't even know haha

how many is some? two?

__________________
2005 FX LEVEL II Blue Led's in grill dash & back window, Tinted tails and clear corners, 3 inch PA Lift, 33x12.5 Duratracs, Front Light Bar with 2 KC 55 Watt Fog Lights and 2 55 Watt Driving Lights
Mods to come: black powdercoated rims, painted valence and fender flares

One set

You can buy them new from a guy on here for 50$ or less shipped....even with 100w bulbs if they are all used and missing wiring I wouldn't buy them for over 50$...I probally wouldn pay 40$ with it missing wiring AND relay...jus sayin...GLWS

__________________
FOR SALE:
Chrome yellow 01 ranger edge 4x4 ext cab 187k miles runs strong, manual, cruise control, tilt, great ac and heat, radio and shifter bezels painted to match, piss on obama sticker on the back window!
Single to dual exhaust-150+ ship chrome exhaust tips from mustang gt-50+ ship custom buggman modded 4x4 3 switch bezel-120+ ship

What exactly is a "100w xenon" bulb
How is that any different than a normal halogen bulb?

Xenon refers to HID not halogen..?

For the xenon bulbs i think its just the color of it, because these are halogens.

U can get a wiring harness pretty cheap for these maybe around15-20 with switch.


Sent from my iPhone using Tapatalk;D

I can get you a brand new package with the wiring harness and switch and all that (as if it came new out of the box)

Hit me up if you need one - $11 + shipping

Could these mount well on my front bumper without a guard? a guy at a 4X4 shop said I could drill a couple holes underneath my grille and they could hold up there. And then, how does the wiring hang going back to my cab?

__________________
1997 XLT Step Side
2.3L 4-cylinder

for me i have hella 50FF they are a smaller oval lights, i used light tabs (L bracket) that i bolted onto the back of the bumper. works great. for running wires into the cab i ran it thru a grommet. top right of the brake pedal i believe. it had a round switch so i took out the cig lighter and cut off the back of it and stuck the switch right there in it's place

If u do it make sure u drill holes were it's the strongest. And as far as wires I ran mine threw my motor compartment and thee a hole on my floor board


Sent from my iPhone using Tapatalk;D

Well I guess I'll get a guy to wire it for me. I don't trust myself with electronics. Haven't done much wiring in my time.

__________________
1997 XLT Step Side
2.3L 4-cylinder

Nor have I. All I have learned was by experimenting on my own truck. I used the stock wire harness and I didn't like it so I redid it with thicker wire and I'd say it's decent. But if your interested in these can email my friend ligushka@gmail.com