I have a 3rd brake light from a 2008 Super Duty that I did an LED mod to.
For trucks that came equipped with cargo lights these are plug and play. For those that came without Cargo lights you will have to run a wire from the dome light back to the harness. I will include the pigtail you need to add the new pin into the plug and I will also provide the buyer with instructions. Its very simple though.
I am looking to get $85 OBO Shipped within the lower 48.
The Brake lights I used 42 Phillips Lumileds at approximately 5 lumens each that's a 210 Lumen Brake light.
Voltage regulator is a Sharp PQ12RD21 which is a 12v regulator.
For the Cargo Lights I used 2 Cree XT-E LEDs one on each side. Driven by a LUX Drive 700mA Flex Block. The cargo lights will be about 500 lumens. I will have some TIR style optics on them so the light is more focused.
This thread has all the specs on the light.
http://www.fordrangerforum.com/gener...ake-light.html