How To: 2001-2003 Fog Light Mod
Written By: STL
Discussion Thread: How To: Fog light mod 2001-2003
Your Ranger comes from the factory, the fog lights turn off when the high beam headlights are on.
This mod will allow your fog lights to stay on when your headlights are in the “High Beam” position.
Open up the hood and locate the power distribution box. Located on driver side up by the firewall.
Remove the lid from the power distribution box.
Locate the fog light relay
2001: 48B it is also located in different location then shown in illustration
On the bottom of the relay you will see several terminals. Use a pair of pliers and bend the # 2 terminal or you can simply break it off which ever you prefer. If you break it then you must buy new relay to reverse this mod.
Now replace the relay. If you chose to bend the terminal when you put it back in that corner will sit a little higher. Replace the lid on the power distribution box and test the results.
Last edited by STL; 06-06-2010 at 02:48 PM.