Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Closed Thread
 
Thread Tools Search this Thread

  #1  
Old 05-28-2010, 08:23 AM
STL STL is offline
...............

 
Join Date: May 2009
Posts: 23,399
Default How To: Blinker Mod (2001-2011)

Written By: STL

Discussion Thread: How To: Blinker Mod (2001-2011


So want your side marker light to have some action?


Tools needed
  • Wire Cutters
  • 1 foot of wire
  • T-Tap wire connectors
  • Electrical Tape

This mod is simple

Take out your headlight How To: Remove headlight and corner light 2001-2011

on the turn signal harness locate the 1 wire that is colored with a stripe there will also be a brown and black wire but you dont want those

Each year is different and each side passenger side and driver side the color is different



Once you locate it splice into it with a t-tap

Now run the new wire you just spliced into over to your marker light

Now cut the black wire on the marker light and take the end that is going back into the engine compartment and tuck it away. You only need the wire that is now coming off the light socket



Now the wire you just ran over from the headlight turn signal t-tap it into the wire coming off the bulb socket and your done


Simple diagram as to how it should look.


Here are the results from this mod
__________________
2005 Edge


Last edited by STL; 09-27-2011 at 01:50 AM.
Closed Thread

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Discuss How To: Blinker Mod STL How-To Submissions 259 06-11-2015 08:24 PM
Blinker Mod ec_dago_ryder Electrical Tech 5 05-13-2010 01:48 PM
anyone know how to do the blinker mod? hpfreak08 Electrical Tech 4 11-22-2009 10:47 AM
Blinker Mod? STL Vehicle Snapshots 14 09-13-2009 06:18 PM
How To: Blinker Mod STL Exterior Guides 0 09-13-2009 11:56 AM