need to find a good site to find headers for a 351 w for the swap

__________________
93 ranger
3.0 v6
4" rough country lift
33" bald rubbers lol
99 flair side bed

any 302 header should work on a 351 because they are the same head except for the bolt diameter all the ports are the same size just diffrent internal parts

http://www.jegs.com/i/Hedman/500/89500/10002/-1
thats a good set right there they also have a v8 swap kit

http://www.jegs.com/i/Trans+Dapt/969/9716K/10002/-1

hopefully that helps

oh and shorti headers for a 302 might work , or mabye block huggers

__________________
1990 Ranger Extended Cab
2.9L V6 5 Speed Transmission
Planning to put a 347 and a T-5 in it eventually

Have them made to go up and over. You can have a speed shop or if you can weld, customize almost any set.

the swap is goin goos so far im just gunna make headders

__________________
93 ranger
3.0 v6
4" rough country lift
33" bald rubbers lol
99 flair side bed

post some pictures!

__________________
1990 Ranger Extended Cab
2.9L V6 5 Speed Transmission
Planning to put a 347 and a T-5 in it eventually

v8 is in an running bolted up to a bourg worner 4 spd i just have to figure out what radiater to use that will keep it cool then it will be road legal anny sujestions wold be geratly apreicated

__________________
93 ranger
3.0 v6
4" rough country lift
33" bald rubbers lol
99 flair side bed

v8 is in intake gasket leaks easy fix lol did a d44 swap out of a grand wagginer leaf spring cant wait till its done

__________________
93 ranger
3.0 v6
4" rough country lift
33" bald rubbers lol
99 flair side bed

an aluminum crossflow radiator will work. James Duff sells them specifically for your application. A friend of mine that used on a LWB Ranger for his 1955 F100. He has no kooling problems at all. Infact he wonders about his engine being too cool.

__________________
2004 Ford Ranger Edge
Any engine info or other mods is need to know and you don't.


http://davidsonmotorsports.blogspot.com/