i'd like to order by the weekend. I have a 2007 4.0l and want a super 44 but i dont know what size to get, i'm going to order it and a cai off summit. thanks

stock exhaust is 2.25"

__________________

is that the same for my 95? i have asked a few people but they havnt told me the answer to my question

__________________
Muddin in the ranger, killin ricers in the f350

95 ford ranger 3.0 v6 side step 5 speed 4x4
mods: 6" bds sus lift, 33x12.5r15 bfg km2, expo OHC/expo power seats, full length expo console, 2 1/2" flowmaster super 44 cat back, 4 procomp 5" offroad lights, clear headlights and turn signals, 6k hid kit, 25% tint (fronts)

PNW CREW

Mine stock was 2" all the way back...

Other years was 2" pipes iwth a 2.25" tip. While others are 2.25" all the way back. Depends on year, motor and such.

__________________
'01 XLT disguised as a '03 Fx4 Level II.

Are you doing full new tailpipes/cat back system? OR just a muffler replacement?

Stock exhaust on yours is either 2" or 2.25". If just replacing the muffler, I'd go 2.25". That way down the road if you upgrade your entire cat-back, you can reuse your muffler with the bigger sized tubing that your new exhaust will be hung with.

You'll want a Offset in/Center out muffler. If you get anything else, the muffler will hang way too low and would pretty much require a trip to the exhaust shop for a complete cat-back.

__________________
'01 XLT disguised as a '03 Fx4 Level II.

ya i'm just gonna do the muffler

k its on the bus, along with an airrade intake. next is trying to fit some kind of sound system in the back seat..