Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #31  
Old 12-08-2010, 10:00 AM
Boduke01Suder Boduke01Suder is offline
Ford Pickup
 
Join Date: Dec 2010
Posts: 116
Default stock exhaust size

Hey does anybody know the stock size exhaust for a 1999 XLT 4WD ranger?
Reply With Quote
  #32  
Old 12-08-2010, 10:15 AM
brett20 brett20 is offline
BEASTTTT MODEEEE
 
Join Date: Nov 2010
Posts: 2,215
Send a message via Yahoo to brett20
Default Re: stock exhaust size

im thinking bout running duals out the sides behind the tires, what all is need besides a y pip and the two flowmaster 40 series mufflers?
gonna get the mufflers from my work, and use the discount
__________________
2013 f150 fx4 ecoboost. Couple mods
SOLD 2002 silver frost 3.slow xlt.
Reply With Quote
  #33  
Old 01-27-2012, 12:27 AM
opeltl02 opeltl02 is offline
Learning to use the forums
 
Join Date: Sep 2011
Posts: 3
Default Re: stock exhaust size

So i'm going to replace my muffler with a thrush turbo to add a little sound to the truck. I've been told that the inlet and outlets are 2", but after reading through all of the post on here, i'm not sure what to go with. I'm not planning on welding it on, just going to use some muffler glue shit i saw a friend once use and clamp it. I dont mind having to buy some extra pipeing to make it fit. But could someone help me going about this. Should i get 2" or the 2.5"? and what size piping should i get to fit around it? Its a 2003, 3.0 v6! Thankss
__________________
Rangerr kidd
Reply With Quote
  #34  
Old 01-27-2012, 07:49 AM
05RangerEdge 05RangerEdge is offline
I'm a sell out
 
Join Date: Jan 2010
Posts: 2,299
Default Re: stock exhaust size

Quote:
Originally Posted by opeltl02 View Post
So i'm going to replace my muffler with a thrush turbo to add a little sound to the truck. I've been told that the inlet and outlets are 2", but after reading through all of the post on here, i'm not sure what to go with. I'm not planning on welding it on, just going to use some muffler glue shit i saw a friend once use and clamp it. I dont mind having to buy some extra pipeing to make it fit. But could someone help me going about this. Should i get 2" or the 2.5"? and what size piping should i get to fit around it? Its a 2003, 3.0 v6! Thankss
I believe the pipes are 2.25. At least thats what my 05 with a 3L was. If your not going to weld just use some band clamps ---- http://www.amazon.com/SmartParts-100225-Preformed-Aluminized-Exhaust/dp/B0043DOTE8
Best to weld it tho, The amount of money you will spend on clamps and other supplies will prob be what it cost to take the muffler up to a shop and have them weld it on .02
__________________
SOLD: 2005 Ranger EDGE+ Supercab (2dr) 4x2
SOLD: 2007 Dodge Ram 1500 QC 5.7 HEMI
CURRENT: 2015 Tacoma DCLB TRD Sport
Reply With Quote
  #35  
Old 01-28-2012, 09:48 PM
opeltl02 opeltl02 is offline
Learning to use the forums
 
Join Date: Sep 2011
Posts: 3
Default Re: stock exhaust size

Thanks for the advice man! I finally decided to quit planning and thinking about it and just do it. So me and my friend took a saw to it and threw a thrush turbo up in there. Turned out being 2" pipes! I'm not sure why, maybe because its a flex fuel?..... no clue lol. BTW thrush turbo sounds awesome, just that little rumble i wanted, but could be a little louder in my opinion!
__________________
Rangerr kidd
Reply With Quote
  #36  
Old 01-29-2012, 10:11 AM
johnspalding4 johnspalding4 is offline
Ford Tough
 
Join Date: Dec 2011
Posts: 302
Default

My 1993 ranger has 2in pipes. The outlet at the very end behind the rear tire was 2.25in, but everything else was 2.0
I have a 2in in 2in out glasspack on my ranger
__________________
1993 Ranger XLT. 3.0l Manual 5 speed. 3/4 drop
Inside: Sony HU | 4x Pioneer TS-G6844R | RF Prime 10in | RF p300 Amp
Outside: Magnaflow | Billet Grill | 5% rear tint | 15% front tint
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Stock exhaust flatblack Exhaust and Mufflers 3 02-12-2010 09:08 PM
exhaust size.. whitelightening Exhaust and Mufflers 6 01-17-2010 08:53 PM
Stock rim size? AntDiN Wheels and Tires 2 12-24-2009 03:06 PM
Need to replace stock exhaust Timmyboy Exhaust and Mufflers 2 08-28-2009 12:04 PM
Lets talk about good exhaust systems to replace stock. Rafe Exhaust and Mufflers 3 06-19-2009 08:38 PM