I was ready to buy a Dual magnflow cat back when a receptionist told me magnaflow has no exhaust that fits on an EDGE... Apparently they fit every ranger from 93-09 except EDGE and Sport. I'd love an explination if anybody has any thoughts on why it is that way, or even if they know of any solution.
,thanks in advance

__________________
-2004 Ford Ranger EDGE
-3.0L V6
-40,000 miles
-500 watt 6 CD changer
-K&N FIPK cold air intake
"Lovely Rita"

whoever told you that is retarded. just get it for an XLT if you have to, just make sure its for the motor you have and the right cab.

for you itd be for a 3.0L ext cab. nothing on the edge is different as far as exhausts.

__________________
http://treadlightly.org/quick-tips-f...four-wheeling/

nothing is even different between ext cab and regular cab except a longer piece of pipe from the cat back. 4cyl should have 2" pipe, v6 should have 2.25" pipe.

__________________
Ball Joints/Upper A-Arms How To
Replace Door pin/bushing
Repair broken dome light tabs
VIDEO OHC Install

yeah this one says 2.5 inch pipe but i doubt that would change anything. I think i will call magnaflow tomorrow and check with them.

__________________
-2004 Ford Ranger EDGE
-3.0L V6
-40,000 miles
-500 watt 6 CD changer
-K&N FIPK cold air intake
"Lovely Rita"

no need to check, you got us right here

__________________
http://treadlightly.org/quick-tips-f...four-wheeling/

Haha yeah thanks. I also saw a video on youtube of a red ranger with a magnaflow. His is a sport wich they say wont fit. He said it was a myth and that it is only if you have a trailer hitch. Even then you can trim it (as he did) to fit just fine.
Case solved lol

__________________
-2004 Ford Ranger EDGE
-3.0L V6
-40,000 miles
-500 watt 6 CD changer
-K&N FIPK cold air intake
"Lovely Rita"

http://www.ebay.com/itm/Magnaflow-15...99467d&vxp=mtr

This says excluding EDGE all over it.

__________________
-2004 Ford Ranger EDGE
-3.0L V6
-40,000 miles
-500 watt 6 CD changer
-K&N FIPK cold air intake
"Lovely Rita"

The only difference in the rear suspension between the Edge/Sport and the XL/XLT is a lift block. I am certain it will fit. Your ebay link didn't work but I assume the seller got their fitment information from magnaflow.

__________________
2002 Blue Edge <-- Retired off road toy
3.0 Automatic, 2wd, 4:56's, 35x12.5 Kuhmo's, Lifted 2x, and more. TOTM July 2015
2002 Jeep TJ <-- NEW off road toy!
2.5L 5-spd, Skyjacker 4.5", 4:56's, Aussie Lockers, 33x12.5's, and more.
Build Thread --> http://www.fordrangerforum.com/proje...blue-edge.html
Youtube --> https://www.youtube.com/user/smashlizard

Alright thanks

__________________
-2004 Ford Ranger EDGE
-3.0L V6
-40,000 miles
-500 watt 6 CD changer
-K&N FIPK cold air intake
"Lovely Rita"

The lifts blocks go on 4wd trucks and 2wds dont get them.

xl/xlt/sport/edge are just trim packages, except the edge has 4wd front suspension and lift blocks.

Since there is so many combos of trucks Magnaflow will only say it works with what the test fit it on.

__________________
99 x-cab 4x4 4.0l auto
mods, cranked t-bars, silencer delete, k&n drop in, Trans Go stage 3 shift kit,3200stall Fuddle Racing Torque Converter,
VANIR 63mm TB, Roush split rear exit exhuast, E-Fan, JBA headers
Auto up/down both windows, OHC, EATC

03 Crown Victoria Police Interceptor

Don't feel bad, the info is only as good as the person putting into the system. I had issues with getting the correct u-joints for the '98 until I brought an old one in to the store and made the parts guy pull every u-joint they had listed for the Ranger so I could compare them side by side. Only then, did I get the ones I needed.

__________________
Sgtsandman's Work in Progress
2011 Ranger XLT, 4X4, 4 door Super Cab. 4.0L, 5 Speed M50D-R1HD, 3.73:1, 8.8" open differential, Jason Pace cap
2019 Ford Ranger STX FX4, Super Crew, 2.3L Ecoboost, 10 speed automatic, 3.73:1 with rear locker, Leer 100XR cap

Okay lol im putting it on with my buddies step dad who is a mechanic.

__________________
-2004 Ford Ranger EDGE
-3.0L V6
-40,000 miles
-500 watt 6 CD changer
-K&N FIPK cold air intake
"Lovely Rita"

HMMMMM this is becoming more and more common...... I just had this issue 2 weeks ago.

__________________
Not a F150 sellout? Click HERE

There is no reason whatsoever that they wont fit on a edge. It baffles me even more that they say it will fit on a FX4 since the FX4 is just an edge with skidplates, bilsteinss, l/s rear and 4x4...

__________________

Couldnt of said it better! But once i get the time/money and SUCCESSFULLY put it on i'll prove this to be BS.

__________________
-2004 Ford Ranger EDGE
-3.0L V6
-40,000 miles
-500 watt 6 CD changer
-K&N FIPK cold air intake
"Lovely Rita"