Re: duals in front of back wheels
Ive looked into doing this before as well, a few problems,
1: Drive shaft, You would have to run true duals, as stated before, Your also kinda screwed if you have the 2.3, (but you dont so your good)
2: Trans Cross member, the passenger side (side the exhaust belongs on) has a dip in the crossmember to allow the pipe to fit under the truck better, on the drivers side it does not, so the pipe would sit lower than the passenger side
3: fuel tank, self explanatory, i hope, right?
Its really not an option for us unfortunately, But you could do a dual out muffler to dual pipes on one side, Or be like me and get a huge ass tip for your side exhaust.
2001 Mazda B-3000 CabPlus "FX2 Off Road"| 3.0 | 5 SPD | 3 In Spindle Lift | Belltech Shackles | UltraGauge |Alpine Head / 10" Kicker Setup | Air Box Mod | Add-A-Leaf| Thrush Welded B4 Rear Wheel | Kobalt Box | Cobra 19 DX IV | Custom PA Speaker | Front/Rear Tow Receiver | 2X Aux Lights | Hideaway Strobes | Back Rack Safety Rack | Amber LED Strobes | Blue LED Strobes | 265/75/R16 General Grabber AT2's
Originally Posted by Clinton
I like little girls...........