Bagged Ranger exhaust HELP

Sumthnlikedat · #1 03-08-2011, 03:57 PM

First off i know there aren't a lot of "bagged" truck guys on here but its worth a shot.
I have a 2000 Ranger xlt and I bought it with no exhaust after the cat and it is way to loud not to mention it wont pass emissions. Ok now the question is what have other "bagged" guys done to there exhaust so it wont bottom out and such?? Any help would be greatly appreciated. Thanks.

01B3000 · #2 03-08-2011, 06:39 PM

Well, i would never bag out my truck, but what you can do is get a muffler, get it so it sits level with the frame and dump it right after the muffler, but dump it right, dont do some cheap ass looking one.

DHEM · #3 03-08-2011, 07:14 PM

you could dump it as stated above, but with it being slammed im not sure if that would work out right.
you could try something like this:

Sumthnlikedat · #4 03-08-2011, 10:00 PM

Thats what I was thinking was cutting the hole but i want to seehow they ran the muffler etc underneath.

Casper · #5 03-08-2011, 10:10 PM

Not many bagged trucks on here look at Rangerpowersports there's a ton of bagged rides there

knightmare1015 · #6 03-09-2011, 01:46 AM

Quote:

Originally Posted by Sumthnlikedat

First off i know there aren't a lot of "bagged" truck guys on here but its worth a shot.
I have a 2000 Ranger xlt and I bought it with no exhaust after the cat and it is way to loud not to mention it wont pass emissions. Ok now the question is what have other "bagged" guys done to there exhaust so it wont bottom out and such?? Any help would be greatly appreciated. Thanks.

Basicly you'd have to run it inside the frame. Flowmaster does make mufflers for low riders. One of them is called Hushpower II. It'll give you a nice deep rumble and since it's so small it would be perfect for your needs. It's made to fit in vehicles where ground clearance is an issue.

Sumthnlikedat · #7 03-10-2011, 10:28 AM

thank you for the help im going to checkout those flowmasters now and rangerpowersports.

83rangerdanger · #8 03-16-2011, 10:21 PM

i made mine custom so after the y pipe no cat then 8inch strate to 6inch step up and then flowmaster with 3inch dump it never hits the ground it is well above my frame

Sumthnlikedat · #9 03-19-2011, 08:54 AM

Thanks 83 but do you have any pics???

83rangerdanger · #10 03-21-2011, 05:44 PM

ya ill get you some in a day or two i am outa state