my first post i would rather b wrenching then typing,b ear with me 96 4.0 ca engine.the egr tube has 2 tubes going up into.a rectangal thing replaced it has power to that,so i know the part is hot the 2 tubes that run back to the EGR tube the down stream tube keeps blowing out probably just the wrong kind hose on it could this happen because cat conv might be pluged no cel on the truck seem to not have as much power i would also in on the hisory of the engine before this one had a blown head gasket for awhile previous owner drove till it ran no more that makes me think it could have a bad cat that rubber house i have changed it twice it takes about 3days or so to blow out it blows out good like 2"rip why is it blowing out and what kind of tubing is req size typing skills suck bad as you can read trying to inprove my mechanic skills as well im pretty sure soom can relate or at least with the part to fix and lead me to the rite path so i can trowl the desert in search of gold thanx bricklayer high in the high desert bha bha
__________________
96 ranger xlt, manual trans,4.0l no mods,my daily driver and i have become a daily mechanic!!
Last edited by nuttybolts; 07-17-2016 at 01:27 AM.
Reason: to confusing and bad puncuation