Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Closed Thread
 
Thread Tools Search this Thread

  #1  
Old 11-05-2009, 12:32 PM
STL STL is offline
...............

 
Join Date: May 2009
Posts: 23,399
Default How To: Air Silencer Removal (Cold Air Intake)

Discussion Thread: How To: Air silencer removal (cold air intake)

Maybe a tad bit different on a newer truck

Warning: No harm can come from this Mod. Some dealerships will try to fault any mod as a reason to deny warranty service, but this mod is not only hard to spot, but its completely reversible if you have second thoughts.

Tools Required:
-WD40
-Your hands

Start by following the instructions in your owners manual to remove the air filter. Picture one picks up from there:








It will take a good bit of tugging to break this loose the first time. Make sure it doesn't catch on any hoses or wires in the area.








It will take some wiggling around to get the bottom tabs to engage their holes. Again be sure not to catch any hoses or wires underneath the box as you push it back in!
__________________
2005 Edge


Last edited by STL; 11-05-2009 at 12:34 PM.
Closed Thread

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Discuss How To: Air Silencer Removal (Cold Air Intake) STL How-To Submissions 276 12-17-2015 01:09 PM
cold air intake even possible? cssranger90 4.0 SOHC / 4.0 OHV Tech 8 07-06-2011 12:02 AM
cold air intake shawn 4-Cylinder Tech 151 07-05-2011 11:55 PM
Cold Air Intake 02BlueRanger General Tech 4 11-03-2009 06:38 PM
Cold Air Intake Bamadude General Ford Ranger Discussion 26 10-01-2009 10:22 PM