Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Closed Thread
 
Thread Tools Search this Thread

  #1  
Old 08-08-2010, 10:50 AM
STL STL is offline
...............

 
Join Date: May 2009
Posts: 23,399
Default How To: Clean IAC (Idle Air Control)

Written By: Stl

Discussion Thread: http://www.fordrangerforum.com/how-s...r-control.html


Tools Needed.
  • 5/16 socket and ratchet
  • CRC throttle body cleaner.
  • Couple Q-tips


1. First remove throttle body plastic cover.


2. Remove electrical connector on the side of the IAC (Red Arrows)
Remove the IAC my removing the two bolts holding it down (Blue Arrows)


3. Lay the IAC down on a paper towel. You will notice it is all black on the inside.


4. Using the CRC throttle body cleaner spray the inside. Use a q-tip to rub down in the tight spots.


5. Let dray and reinstall in reverse order.
__________________
2005 Edge

Closed Thread

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Discuss How To: Clean IAC (Idle Air Control) STL How-To Submissions 116 06-30-2015 01:16 AM
Discuss How To: Clean MAF (Mass Air Flow Sensor) STL How-To Submissions 65 02-08-2015 08:04 PM
How to clean the IAC valve big green How-To Submissions 20 04-27-2014 12:09 PM
How To: Clean MAF (Mass Air Flow Sensor) STL Engine/Drivetrain Guides 0 07-26-2010 05:05 PM
Discuss How To: Replace Idle Air Control vavle (IAC) surfer03133 How-To Submissions 0 08-22-2009 08:42 PM