|
|
|
|
08-06-2013, 08:25 PM
|
|
Ford Tough
|
|
Join Date: Aug 2010
Posts: 416
|
|
K&N 33-2106-1 Filter for 3.0/4.0 & Cleaning Kit - NV
Hey All, I've been absent from the forum for quite sometime busy with school. I now have a few items I have laying around I'd like to get off my hands.
I have a used K&N 33-2106-1 Filter. I bought it in the second year I owned my ranger (late 2011) and removed about a year later and switched to a cone AEM Dryflow. I don't have an exact mileage but I would estimate about 12k - 15k miles on it (years worth). So this filter is basically at the beginning of its life (million mile warranty). In the time I have cleaned it about two times. With the filter, you will also get the cleaning and oiling K&N set with instructions. As stated, I've used it twice and I would estimate both bottles are somewhere above/ near half full. What you see in the pictures is what you will get. I do not have the original filter box or stickers. The filter is pictured not oiled - therefore it shows grey - the oil gives it the red K&N color. Should fit various rangers 3.0 and 4.0. Check the K&N site below.
http://www.knfilters.com/search/prod...prod=33-2106-1
Originally paid over $65 for the filter from autozone and $15 for the cleaning kit.
Would like to sell for $50 + shipping OBO. Paypal or cash if local (Las Vegas)
__________________
2002 Ranger XLT 3.0
General Grabber AT2 31/10.5/15, 15x7 ATX Slot, Hot girlfriend for passenger seat, Fabtech 2.5", Bilstein 5100, Poly Bumps, JBA Ceramic Coated Headers, Straigh pipe, Throttle Cable Mod, Air Box Mod, 5 Angle Valve Job, 180* Thermostat, Clear corners w/ Amber LEDs, Tinted Tails, 6000K Volt Digital HID Hi/Lo, K&N Drop-In, MAF Mod,
|
|
|
|
Register and never see these ads again. |
|
08-12-2013, 09:56 AM
|
|
Ford Tough
|
|
Join Date: Aug 2010
Posts: 416
|
|
Re: K&N 33-2106-1 Filter for 3.0/4.0 & Cleaning Kit - NV
Bump. New price $40.
__________________
2002 Ranger XLT 3.0
General Grabber AT2 31/10.5/15, 15x7 ATX Slot, Hot girlfriend for passenger seat, Fabtech 2.5", Bilstein 5100, Poly Bumps, JBA Ceramic Coated Headers, Straigh pipe, Throttle Cable Mod, Air Box Mod, 5 Angle Valve Job, 180* Thermostat, Clear corners w/ Amber LEDs, Tinted Tails, 6000K Volt Digital HID Hi/Lo, K&N Drop-In, MAF Mod,
|
08-21-2013, 10:27 AM
|
|
Ford Tough
|
|
Join Date: Aug 2010
Posts: 416
|
|
Bump, make an offer. $40 everything shipped
__________________
2002 Ranger XLT 3.0
General Grabber AT2 31/10.5/15, 15x7 ATX Slot, Hot girlfriend for passenger seat, Fabtech 2.5", Bilstein 5100, Poly Bumps, JBA Ceramic Coated Headers, Straigh pipe, Throttle Cable Mod, Air Box Mod, 5 Angle Valve Job, 180* Thermostat, Clear corners w/ Amber LEDs, Tinted Tails, 6000K Volt Digital HID Hi/Lo, K&N Drop-In, MAF Mod,
|
Thread Tools |
Search this Thread |
|
|
|
|