Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Thread Tools Search this Thread

Old 07-20-2011, 04:51 AM
bigdan002001 bigdan002001 is offline
Like the Forums
Join Date: Dec 2009
Posts: 39
Default 1997 4.0L OHV used engine

I just pulled my 4.0L out of my 97 ranger, was gonna just replace gaskets and remove oil pan to install good used dipstick tube (which I have) since original one rusted off. I have decided to go another route since have motor out and will no longer need this one. Motor ran strong and has 200,000 miles on it. The motor comes with oil pan, used dipstick tube, exhaust manifolds, water pump, lower intake manifold, valve covers, and a flywheel for manual transmission (8 bolt). Still has all sensors threaded into block and one are rear of intake for cam position. All you will need to do is pull pan, install new dipstick tube, get new pan gaskets, new valve cover gaskets and install your fuel rail and intake and this thing is good to go. I am not looking to ship and would like local pickup due to weight of it. Asking 275.00 for it.

Thanks for looking,
Dan M.

1997 Ranger Extended Cab 4x4
5 speed manual
completely stock
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
4.0 OHV Engine Electrical jmshanafelt 4.0 SOHC / 4.0 OHV Tech 4 07-09-2011 12:33 PM
For Sale: 1997 4cyl Ranger Engine Gum85 Trucks 0 01-17-2011 04:20 PM
Is my engine OHV SOHC? Clinton 4.0 SOHC / 4.0 OHV Tech 35 08-09-2010 11:02 AM
can't get crankshaft pulley off 1997 2.3l engine! godredger 4-Cylinder Tech 2 07-08-2010 02:58 PM
1997 3.0 to 5.0 or similar engine swap and tranny 97Ranger 8-Cylinder Tech 3 10-20-2009 07:50 PM