Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Thread Tools Search this Thread

Old 05-24-2011, 05:16 PM
Ahum Ahum is offline
1985: A very good year!..
Join Date: Feb 2011
Posts: 98
Default 4C 2.0 Carbed 85/86 Idle speed control module.

Looking for Idle speed controller. This is a module found on the passinger side, mounted on the wheel plastic insert covers, under the hood. It is a electronic module about 8 inches square, three bolts holding it with a large connector in the middle.

These were on 1985 and 1986. Others I don't know. The number on the lable of the module is: E5TF-9L513-AA. The Ford part number is: E5TZ-9L513-A. If you have one of these I can use it.

I figured this is the right heading for this thread. The vehicle this comes from should NOT have the black tarish area disturbed. Or the tar starting to run out of the square holder.

If you have one, from a old ranger, or a parts truck, or just sitting on the shelf. Please let me know. I think my engine will run better with this module replaced.

1985 A very good year. Made in the USA, that's why it's running today!. It's a antique, although some people don't think it's old enough to be a "Antique"..
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
For Sale: Ignition Control Module sbristow84 Engine & Drivetrain Parts 19 02-18-2012 06:52 PM
wiper control module Dave68MHS Electrical Tech 4 10-27-2011 11:06 AM
WANTED: 1985 Ranger Idle speed controller module 4CF 2.0 Carbed Ahum Electrical Tech 1 05-24-2011 05:16 PM
control module problems busted ranger Drivetrain Tech 2 11-16-2010 01:56 PM
Help...ignition control module mecha 4-Cylinder Tech 3 08-13-2010 07:32 AM