Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Closed Thread
 
Thread Tools Search this Thread

  #1  
Old 08-12-2010, 02:31 PM
01_ranger_4x4 01_ranger_4x4 is offline
OIF Veteran

 
Join Date: Feb 2010
Posts: 6,043
Default 4:10 Gear set, front and rear-MI

These are the stock gears from my 2001 4x4 ranger. The front set is for a Dana 35 IFS and the rear set is for an 8.8" The gears have approximately 40,000 miles on them and there is no noticeable wear. These gears were removed a few years ago when i swapped in 4:56 gears. I'm asking $150 firm plus shipping for these as a set, i prefer not to separate the set at this time.
__________________
2001 Ranger 4x4 Stepside
-RCD Suspension lift
-33x12.5 BFG KM2's on Mickey Thomson classic locks
-4:56 gears
-Auburn gear LS
-James Duff traction bars
-Headers
-Flowmaster duals
-SCT X-Cal2 and some small exterior mods

http://www.cardomain.com/ride/2321189

2005 F-150 Lariat 4x4
-LED third brake light
-Weathertech floor liners
-Edge tuner

Last edited by 01_ranger_4x4; 09-14-2010 at 02:27 PM.
  #2  
Old 08-12-2010, 07:20 PM
talkington talkington is offline
Ford Pickup
 
Join Date: Dec 2009
Posts: 123
Default Re: 4:10 Gear set, front and rear-MI

im kinda interested but im not too keen on the install of gears in front or rear end. could you tell me about it?
__________________
1999 ford ranger 4.0l v6 4wd
-3 inch body lift
-custom ultra type 50 15x8 rims -31x10.5r15 bighorn maxxis MT tires -stock stereo with line output converter and 500 watt jensen amp with a 12" Mtx thunder 4500 sub-custom white neon blue guage overlays-pro-comp explorer stainless fog lights
  #3  
Old 08-13-2010, 02:09 AM
01_ranger_4x4 01_ranger_4x4 is offline
OIF Veteran

 
Join Date: Feb 2010
Posts: 6,043
Default Re: 4:10 Gear set, front and rear-MI

Quote:
Originally Posted by talkington View Post
im kinda interested but im not too keen on the install of gears in front or rear end. could you tell me about it?
setting up the gears in the front diff is exactly the same as doing the rear gears. in fact its a little easier because you can take the whole center section out of the truck and set it on the work bench.
__________________
2001 Ranger 4x4 Stepside
-RCD Suspension lift
-33x12.5 BFG KM2's on Mickey Thomson classic locks
-4:56 gears
-Auburn gear LS
-James Duff traction bars
-Headers
-Flowmaster duals
-SCT X-Cal2 and some small exterior mods

http://www.cardomain.com/ride/2321189

2005 F-150 Lariat 4x4
-LED third brake light
-Weathertech floor liners
-Edge tuner
  #4  
Old 08-13-2010, 11:15 AM
talkington talkington is offline
Ford Pickup
 
Join Date: Dec 2009
Posts: 123
Default Re: 4:10 Gear set, front and rear-MI

ok and what kinda tools do you have to use ? any special tools or anything? i don't have much expienence with gearing.
__________________
1999 ford ranger 4.0l v6 4wd
-3 inch body lift
-custom ultra type 50 15x8 rims -31x10.5r15 bighorn maxxis MT tires -stock stereo with line output converter and 500 watt jensen amp with a 12" Mtx thunder 4500 sub-custom white neon blue guage overlays-pro-comp explorer stainless fog lights
  #5  
Old 08-13-2010, 02:18 PM
RangerLuc RangerLuc is offline
yup
 
Join Date: Sep 2009
Posts: 1,407
Default Re: 4:10 Gear set, front and rear-MI

Quote:
Originally Posted by talkington View Post
ok and what kinda tools do you have to use ? any special tools or anything? i don't have much expienence with gearing.
take it to someone who does so u dont cause more problems than good. i got my dana 44 re-geared for 150
__________________
2001 XLT 4x4 V6 4.0L auto
SAS'd D44 and 8.8. dual lockers, 38s, 12 bolt h1's, some other odds and ends
  #6  
Old 08-13-2010, 03:08 PM
TurdFX4 TurdFX4 is offline
Sept. 2011 TOTM
 
Join Date: Jan 2010
Posts: 1,771
Default Re: 4:10 Gear set, front and rear-MI

seems like a good price, I'd be interested if I didnt already have them
  #7  
Old 08-13-2010, 04:59 PM
01_ranger_4x4 01_ranger_4x4 is offline
OIF Veteran

 
Join Date: Feb 2010
Posts: 6,043
Default Re: 4:10 Gear set, front and rear-MI

Quote:
Originally Posted by talkington View Post
ok and what kinda tools do you have to use ? any special tools or anything? i don't have much expienence with gearing.
if you havent done gears before i wouldnt try it. not trying to be insulting but setting gears isnt for beginners. besides needing a couple special tools like dial indicator and base, micrometers and a press for pressing the bearings on, there is a trick to setting them up. im not usually one to tell anyone not to do something them self but for these i would have someone do it for you and maybe you can look over there shoulder while they do it so you can learn how to do it.
__________________
2001 Ranger 4x4 Stepside
-RCD Suspension lift
-33x12.5 BFG KM2's on Mickey Thomson classic locks
-4:56 gears
-Auburn gear LS
-James Duff traction bars
-Headers
-Flowmaster duals
-SCT X-Cal2 and some small exterior mods

http://www.cardomain.com/ride/2321189

2005 F-150 Lariat 4x4
-LED third brake light
-Weathertech floor liners
-Edge tuner
  #8  
Old 08-13-2010, 09:52 PM
talkington talkington is offline
Ford Pickup
 
Join Date: Dec 2009
Posts: 123
Default Re: 4:10 Gear set, front and rear-MI

yea i wasn't planning on doing it myself cause i don't have the tooling needed for it cause i have sold most of my tools cause im leaving to the navy.. how much do you think it would cost to have someone gear both front and rear??
__________________
1999 ford ranger 4.0l v6 4wd
-3 inch body lift
-custom ultra type 50 15x8 rims -31x10.5r15 bighorn maxxis MT tires -stock stereo with line output converter and 500 watt jensen amp with a 12" Mtx thunder 4500 sub-custom white neon blue guage overlays-pro-comp explorer stainless fog lights
  #9  
Old 08-13-2010, 10:02 PM
RangerLuc RangerLuc is offline
yup
 
Join Date: Sep 2009
Posts: 1,407
Default Re: 4:10 Gear set, front and rear-MI

Quote:
Originally Posted by talkington View Post
yea i wasn't planning on doing it myself cause i don't have the tooling needed for it cause i have sold most of my tools cause im leaving to the navy.. how much do you think it would cost to have someone gear both front and rear??
if u looked u woulda saw tht i already posted tht
__________________
2001 XLT 4x4 V6 4.0L auto
SAS'd D44 and 8.8. dual lockers, 38s, 12 bolt h1's, some other odds and ends

Last edited by RangerLuc; 08-13-2010 at 11:12 PM.
  #10  
Old 08-13-2010, 10:09 PM
Clinton Clinton is offline
Banned
 
Join Date: Mar 2010
Posts: 14,049
Default Re: 4:10 Gear set, front and rear-MI

Patrick, are those stock gears that i would have in my truck as well?
  #11  
Old 08-14-2010, 08:34 AM
01_ranger_4x4 01_ranger_4x4 is offline
OIF Veteran

 
Join Date: Feb 2010
Posts: 6,043
Default Re: 4:10 Gear set, front and rear-MI

Quote:
Originally Posted by talkington View Post
yea i wasn't planning on doing it myself cause i don't have the tooling needed for it cause i have sold most of my tools cause im leaving to the navy.. how much do you think it would cost to have someone gear both front and rear??
i wouldnt be able to tell you that. ive seen people pay anywhere from $200- $1000 depending on the shop. i would just call around to a few drivetrain shops and get a few different prices.
Quote:
Originally Posted by Clinton View Post
Patrick, are those stock gears that i would have in my truck as well?
its a good possibility, check out this axle guide and find out what rear axle you have and you will know what ratio you have. http://www.fordrangerforum.com/drive...xle-codes.html
__________________
2001 Ranger 4x4 Stepside
-RCD Suspension lift
-33x12.5 BFG KM2's on Mickey Thomson classic locks
-4:56 gears
-Auburn gear LS
-James Duff traction bars
-Headers
-Flowmaster duals
-SCT X-Cal2 and some small exterior mods

http://www.cardomain.com/ride/2321189

2005 F-150 Lariat 4x4
-LED third brake light
-Weathertech floor liners
-Edge tuner
  #12  
Old 08-18-2010, 05:29 PM
01_ranger_4x4 01_ranger_4x4 is offline
OIF Veteran

 
Join Date: Feb 2010
Posts: 6,043
Default Re: 4:10 Gear set, front and rear-MI

__________________
2001 Ranger 4x4 Stepside
-RCD Suspension lift
-33x12.5 BFG KM2's on Mickey Thomson classic locks
-4:56 gears
-Auburn gear LS
-James Duff traction bars
-Headers
-Flowmaster duals
-SCT X-Cal2 and some small exterior mods

http://www.cardomain.com/ride/2321189

2005 F-150 Lariat 4x4
-LED third brake light
-Weathertech floor liners
-Edge tuner
  #13  
Old 08-18-2010, 05:33 PM
Clinton Clinton is offline
Banned
 
Join Date: Mar 2010
Posts: 14,049
Default Re: 4:10 Gear set, front and rear-MI

Quote:
Originally Posted by 01_ranger_4x4 View Post
Now thats fuckin funny!!!
  #14  
Old 08-18-2010, 05:43 PM
01_ranger_4x4 01_ranger_4x4 is offline
OIF Veteran

 
Join Date: Feb 2010
Posts: 6,043
Default Re: 4:10 Gear set, front and rear-MI

Quote:
Originally Posted by Clinton View Post
Now thats fuckin funny!!!
i know i laughed my ass off the first time a saw it.
__________________
2001 Ranger 4x4 Stepside
-RCD Suspension lift
-33x12.5 BFG KM2's on Mickey Thomson classic locks
-4:56 gears
-Auburn gear LS
-James Duff traction bars
-Headers
-Flowmaster duals
-SCT X-Cal2 and some small exterior mods

http://www.cardomain.com/ride/2321189

2005 F-150 Lariat 4x4
-LED third brake light
-Weathertech floor liners
-Edge tuner
  #15  
Old 08-18-2010, 05:48 PM
Clinton Clinton is offline
Banned
 
Join Date: Mar 2010
Posts: 14,049
Default Re: 4:10 Gear set, front and rear-MI

Yeah me too just now! My partner here at work couldnt figure out why i was laughing! No sense of humor!
Closed Thread

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Front and Rear fluid change? What fluid? Frez1812 Drivetrain Tech 11 05-02-2010 03:51 PM
2001 Front/rear bumpers aaron_ariens Exterior Tech 19 04-02-2010 03:13 PM
Got my cobra rear disc set-up. THE H.P FREAK Drivetrain Tech 5 02-05-2010 01:14 PM
P205x75r14(front) P235x75r15(rear) modelageek Wheels and Tires 15 12-16-2009 09:49 PM
Painted Front Trim and Rear Bumper Bighomedog11 Exterior Tech 9 09-30-2009 11:00 AM