Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > Ford Ranger Technical > Electrical Tech
Forgot Password? Join Us!


Reply
 
LinkBack Thread Tools Search this Thread

  #1  
Old 02-01-2013, 09:00 AM
Learning to use the forums
 
Join Date: Feb 2013
Posts: 3
Default 1991 Ford Ranger XLT 3.0 OBD Port

Hello I need help I can not find the OBD Port it is not near the fuse block.
My ranger was running cold so I put in a new thermostat and now I have good heat but soon as it warms up it stalls and will not restart until engine is cold. I unplugged the temp control still no luck.
__________________
Will
1991 Ford Ranger XLT 3.0
Reply With Quote
  #2  
Old 02-01-2013, 10:28 AM
Ford Ranger Owner
 
Join Date: Oct 2012
Posts: 72
Default

Quote:
Originally Posted by willalbert@yahoo.com View Post
Hello I need help I can not find the OBD Port it is not near the fuse block.
My ranger was running cold so I put in a new thermostat and now I have good heat but soon as it warms up it stalls and will not restart until engine is cold. I unplugged the temp control still no luck.
Check near the blower fan housing assembly. There are 2 plugs, a single wire square one and a 5 terminal trapezoid shaped plug. If I recall, it only has 4 wires
Reply With Quote
  #3  
Old 02-02-2013, 06:29 AM
Learning to use the forums
 
Join Date: Feb 2013
Posts: 3
Default Re: 1991 Ford Ranger XLT 3.0 OBD Port

Thanks nothing there the only thing I can find is on the drivers side mounted next to the radiator is a large plug with a grey plug on top of it.
__________________
Will
1991 Ford Ranger XLT 3.0
Reply With Quote
  #4  
Old 02-02-2013, 09:31 AM
Ford Ranger Owner
 
Join Date: Oct 2012
Posts: 72
Default

Quote:
Originally Posted by willalbert@yahoo.com View Post
Thanks nothing there the only thing I can find is on the drivers side mounted next to the radiator is a large plug with a grey plug on top of it.
Pic ?
Reply With Quote
  #5  
Old 02-02-2013, 10:09 AM
1992 3.0 xlt
 
Join Date: Nov 2011
Posts: 46
Default Re: 1991 Ford Ranger XLT 3.0 OBD Port

obd1 under hood on my 1992, passenger fender over tire
__________________
1992 3.0 xlt
Reply With Quote
  #6  
Old 02-03-2013, 07:25 AM
Learning to use the forums
 
Join Date: Feb 2013
Posts: 3
Default Re: 1991 Ford Ranger XLT 3.0 OBD Port

Thank you all found it, could it be the temp sensor once warm the truck bogs stalls and will not restart till cold

----------

Thanks found it could the temp.cancer be bad when warm truck bogs stalls and will not restart till cold runs fine cold
__________________
Will
1991 Ford Ranger XLT 3.0
Reply With Quote
  #7  
Old 02-03-2013, 09:32 AM
Ford Ranger Owner
 
Join Date: Oct 2012
Posts: 72
Default Re: 1991 Ford Ranger XLT 3.0 OBD Port

Quote:
Originally Posted by willalbert@yahoo.com View Post
Thank you all found it, could it be the temp sensor once warm the truck bogs stalls and will not restart till cold

----------

Thanks found it could the temp.cancer be bad when warm truck bogs stalls and will not restart till cold runs fine cold
what codes did you find ?
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
OBD Port Dead Keith_C Electrical Tech 2 01-21-2012 07:02 AM
Just got a 1991 Ford Ranger! TheAdam Introduce Yourself 13 12-30-2011 08:52 AM
For Sale: 96 Ford Ranger 3.0L V6 Electronic control unit (OBD II) 97rangermazda Misc Items 0 10-07-2011 07:51 PM
Does the 1991 Ranger 3.0L have a OBD port? davidsheets 3.0 Vulcan Tech 2 05-24-2011 02:02 PM
my 1991 ford ranger sic9 Vehicle Snapshots 4 06-01-2009 07:22 AM



Search Engine Friendly URLs by vBSEO 3.6.0 ©2011, Crawlability, Inc.