Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 02-16-2010, 10:27 PM
RangerSteve RangerSteve is offline
2000 XLT 3.0 2WD 81,000M
 
Join Date: Feb 2010
Posts: 62
Post Door lock actuator....

If anyone has replaced one of these before any info would be appreciated...Thanks!
Reply With Quote
  #2  
Old 02-16-2010, 10:32 PM
Redneckstone Redneckstone is offline
Welcome to FRF, & enjoy!

 
Join Date: Oct 2009
Posts: 5,110
Default

there is 2 kinds. done both.

first is reg cab and 2 door 2ext cab. there a module that's riveted to the door down lower. drill out the rivet and replace.

next is the 4 door ext cab. which you need to take out the whole door striker 3 bolts and fish it out then you take 2 pocket screw drivers and pop it out of the striker and pop in the new one. neither are that hard just a PITA because of the tight area and the fishing the rod out of its home
__________________
2000 Ford Ranger XLT 4x4 Offroad, 4.0L ext cab, Converted to Manual M5OD-R1HD.
_____________
33x13.50 Toyo M/T, 15x10, Body Lift, Rebuilt OHV, JBA headers, Hurst shifter, Warn VR10000-s, Class 1 bars, Belltech Shackles, Mustang GT rear disc, Level II hooks, Modded rear hitch, Custom front hitch, Level II Blue seats and black console, Explorer IRS rear cover, Extang fulltilt, Leer Cap Yakima Roof Rack, Cobra 29 with firestik stake mount, Scangauge II
Few mods
Reply With Quote
  #3  
Old 02-16-2010, 11:01 PM
RangerSteve RangerSteve is offline
2000 XLT 3.0 2WD 81,000M
 
Join Date: Feb 2010
Posts: 62
Default

Its an extended cab. It looked like it was riveted though...I guess I'll take another look. If it's not riveted then what holds the actuator in place? The rod?

2000 2WD Ext. Cab
Reply With Quote
  #4  
Old 02-16-2010, 11:17 PM
Redneckstone Redneckstone is offline
Welcome to FRF, & enjoy!

 
Join Date: Oct 2009
Posts: 5,110
Default

ext 2 door or 4 door did you not read?
__________________
2000 Ford Ranger XLT 4x4 Offroad, 4.0L ext cab, Converted to Manual M5OD-R1HD.
_____________
33x13.50 Toyo M/T, 15x10, Body Lift, Rebuilt OHV, JBA headers, Hurst shifter, Warn VR10000-s, Class 1 bars, Belltech Shackles, Mustang GT rear disc, Level II hooks, Modded rear hitch, Custom front hitch, Level II Blue seats and black console, Explorer IRS rear cover, Extang fulltilt, Leer Cap Yakima Roof Rack, Cobra 29 with firestik stake mount, Scangauge II
Few mods
Reply With Quote
  #5  
Old 02-16-2010, 11:18 PM
RangerSteve RangerSteve is offline
2000 XLT 3.0 2WD 81,000M
 
Join Date: Feb 2010
Posts: 62
Default 4dr

my bad
Reply With Quote
  #6  
Old 02-16-2010, 11:22 PM
Redneckstone Redneckstone is offline
Welcome to FRF, & enjoy!

 
Join Date: Oct 2009
Posts: 5,110
Default

its in the door lock striker. have to remove it. then pop it out of the mechanism easy to do
__________________
2000 Ford Ranger XLT 4x4 Offroad, 4.0L ext cab, Converted to Manual M5OD-R1HD.
_____________
33x13.50 Toyo M/T, 15x10, Body Lift, Rebuilt OHV, JBA headers, Hurst shifter, Warn VR10000-s, Class 1 bars, Belltech Shackles, Mustang GT rear disc, Level II hooks, Modded rear hitch, Custom front hitch, Level II Blue seats and black console, Explorer IRS rear cover, Extang fulltilt, Leer Cap Yakima Roof Rack, Cobra 29 with firestik stake mount, Scangauge II
Few mods
Reply With Quote
  #7  
Old 02-16-2010, 11:41 PM
RangerSteve RangerSteve is offline
2000 XLT 3.0 2WD 81,000M
 
Join Date: Feb 2010
Posts: 62
Default

I'll give it a go. Thanks!
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Door lock trouble tumbler General Tech 12 07-27-2013 06:53 AM
stuck rear door on '99 4 door mikecyr General Tech 9 02-25-2013 09:04 PM
Door Chime / Dome Light / Door Ajar Problem RangerTruck Electrical Tech 26 08-11-2012 08:10 AM
blend door actuator 12jjs12 Electrical Tech 0 10-21-2009 12:33 PM
differential lock Naveto Drivetrain Tech 2 02-05-2009 10:02 AM