|
11-03-2014, 04:42 PM
|
|
Sept. TOTM
|
|
Join Date: Jul 2011
Posts: 12,240
|
|
4.0 and 3.0 MAF
Will a 4.0L MAF from an 02 work on my 98 3.0L?
I know it will bolt up and the wire connector fits but will it work?
__________________
1999 Ranger 3.0FFV-ExtCab-4x4- My 99 Build
1998 Ranger 3.0-ExtCab-4x4-PROJECT TRUCK- My 98 Build
GC-EXTREME GRAPHICS NEED CUSTOM DECALS, APPAREL, or GLASS MUGS?
Visit My Thread!
Custom Stuff, Great Quality, & Great Prices!
These Graphics ROCK!
Buggman LEDS & GC-Extreme Graphics Joint Venture Mod Products Coming Soon!
Are you READY?!
|
Register and never see these ads again. |
|
11-03-2014, 04:45 PM
|
|
Ford Ranger Driver
|
|
Join Date: Jan 2012
Posts: 6,279
|
|
I would assume so sense it's a sensor and the air boxes are the same. Are the part numbers the same? Sorry I can't give you a concrete answer
__________________
Black 2008 ranger sport 4.0 SOHC SAS'd and converted to 4x4 riding on a Dana 50 up front and a sterling 10.50 in the rear regeared with 5.13's, mickey thompson classic 3's rapped in 37x12.50 maxxis creepy crawlers
|
11-03-2014, 04:46 PM
|
|
ford dealer parts guy
|
|
Join Date: Apr 2011
Posts: 20,938
|
|
Re: 4.0 and 3.0 MAF
Quote:
Originally Posted by sole
I would assume so sense it's a sensor and the air boxes are the same. Are the part numbers the same? Sorry I can't give you a concrete answer
|
^^^
this cross reference the part numbers if they match its a go if not then no go
__________________
2021 F150 5.0 Screw
Past:18 F150 2.7, 16 F150 5.0, 14 F150 5.0, 07 F150 5.4, 03 Ranger 4.0
Master Certified Ford Parts / Warranty Admin
|
11-03-2014, 04:58 PM
|
|
Sept. TOTM
|
|
Join Date: Jul 2011
Posts: 12,240
|
|
Re: 4.0 and 3.0 MAF
Looking at the numbers theres several sets...the first set match..but not the others. But even my 98 and 99 3.0Ls the last two sets dont match.
----------
Also the 4.0 and 3.0 aiboxes arent the same.
My 98 3.0l the lid has broken tabs and wont seal..i got a 4.0L lid from a junkyard..but the maf tube that attaches to it and the intake tubes are slightly bigger.
----------
Nevermind..they arent the same..ones a 6 pin and ones a 4 pin. The connectors looked the same from the outside.
So nope wont work
__________________
1999 Ranger 3.0FFV-ExtCab-4x4- My 99 Build
1998 Ranger 3.0-ExtCab-4x4-PROJECT TRUCK- My 98 Build
GC-EXTREME GRAPHICS NEED CUSTOM DECALS, APPAREL, or GLASS MUGS?
Visit My Thread!
Custom Stuff, Great Quality, & Great Prices!
These Graphics ROCK!
Buggman LEDS & GC-Extreme Graphics Joint Venture Mod Products Coming Soon!
Are you READY?!
|
11-03-2014, 05:35 PM
|
|
Danger 5.0
|
|
Join Date: Mar 2013
Posts: 1,308
|
|
Quote:
Originally Posted by gcextreme
Looking at the numbers theres several sets...the first set match..but not the others. But even my 98 and 99 3.0Ls the last two sets dont match. ---------- Also the 4.0 and 3.0 aiboxes arent the same. My 98 3.0l the lid has broken tabs and wont seal..i got a 4.0L lid from a junkyard..but the maf tube that attaches to it and the intake tubes are slightly bigger. ---------- Nevermind..they arent the same..ones a 6 pin and ones a 4 pin. The connectors looked the same from the outside. So nope wont work
|
I have a complete stock intake with the maf sensor I will sell, pulled off my current 3.0. Engine swap, so I don't need it.
__________________
99 xlt, 5.0, torsion bars cranked, 4" body lift, 33" Goodyear Duratracs, 15x10 American racing 5 spoke rims, 2004 ranger edge seats, buggman LEDs in dash, Aussie locker in front, 8.8 with discs and mini spool in rear, blue led underglow.
|
11-03-2014, 05:39 PM
|
|
Sept. TOTM
|
|
Join Date: Jul 2011
Posts: 12,240
|
|
Re: 4.0 and 3.0 MAF
I only need the lid and maf and the maf body.
How much would u want?
__________________
1999 Ranger 3.0FFV-ExtCab-4x4- My 99 Build
1998 Ranger 3.0-ExtCab-4x4-PROJECT TRUCK- My 98 Build
GC-EXTREME GRAPHICS NEED CUSTOM DECALS, APPAREL, or GLASS MUGS?
Visit My Thread!
Custom Stuff, Great Quality, & Great Prices!
These Graphics ROCK!
Buggman LEDS & GC-Extreme Graphics Joint Venture Mod Products Coming Soon!
Are you READY?!
|
11-03-2014, 05:40 PM
|
|
Danger 5.0
|
|
Join Date: Mar 2013
Posts: 1,308
|
|
Quote:
Originally Posted by gcextreme
I only need the lid and maf and the maf body. How much would u want?
|
don't really know, what sounds fair??
__________________
99 xlt, 5.0, torsion bars cranked, 4" body lift, 33" Goodyear Duratracs, 15x10 American racing 5 spoke rims, 2004 ranger edge seats, buggman LEDs in dash, Aussie locker in front, 8.8 with discs and mini spool in rear, blue led underglow.
|
11-03-2014, 05:43 PM
|
|
Sept. TOTM
|
|
Join Date: Jul 2011
Posts: 12,240
|
|
Re: 4.0 and 3.0 MAF
Well i got this lid and maf stuff from the 4.0 from the local junkyard for $20....only to find out it wont work and they wont take it back lol.
Get it boxed up and get me a shipping quote to Villard Mn 56385 and i can probably do $30 plus shipping...
__________________
1999 Ranger 3.0FFV-ExtCab-4x4- My 99 Build
1998 Ranger 3.0-ExtCab-4x4-PROJECT TRUCK- My 98 Build
GC-EXTREME GRAPHICS NEED CUSTOM DECALS, APPAREL, or GLASS MUGS?
Visit My Thread!
Custom Stuff, Great Quality, & Great Prices!
These Graphics ROCK!
Buggman LEDS & GC-Extreme Graphics Joint Venture Mod Products Coming Soon!
Are you READY?!
|
11-03-2014, 05:45 PM
|
|
Danger 5.0
|
|
Join Date: Mar 2013
Posts: 1,308
|
|
Quote:
Originally Posted by gcextreme
Well i got this lid and maf stuff from the 4.0 from the local junkyard for $20....only to find out it wont work and they wont take it back lol. Get it boxed up and get me a shipping quote to Villard Mn 56385 and i can probably do $30 plus shipping...
|
ok, would Friday be too late? I'm out of town, but if you absolutely need it i could have my wife try to figure it out.....
__________________
99 xlt, 5.0, torsion bars cranked, 4" body lift, 33" Goodyear Duratracs, 15x10 American racing 5 spoke rims, 2004 ranger edge seats, buggman LEDs in dash, Aussie locker in front, 8.8 with discs and mini spool in rear, blue led underglow.
|
11-03-2014, 05:48 PM
|
|
Sept. TOTM
|
|
Join Date: Jul 2011
Posts: 12,240
|
|
Re: 4.0 and 3.0 MAF
No friday will be fine. Im only driving the truck back and forth to work which is less than a mile. Im doing brake pads and stuff this weekend on it. Plus its not my only vehicle i still have the red ranger. So no big hurry...just need it before i put the red one into storage for the winter..hopefully 2 weeks
__________________
1999 Ranger 3.0FFV-ExtCab-4x4- My 99 Build
1998 Ranger 3.0-ExtCab-4x4-PROJECT TRUCK- My 98 Build
GC-EXTREME GRAPHICS NEED CUSTOM DECALS, APPAREL, or GLASS MUGS?
Visit My Thread!
Custom Stuff, Great Quality, & Great Prices!
These Graphics ROCK!
Buggman LEDS & GC-Extreme Graphics Joint Venture Mod Products Coming Soon!
Are you READY?!
|
11-03-2014, 05:51 PM
|
|
Danger 5.0
|
|
Join Date: Mar 2013
Posts: 1,308
|
|
Quote:
Originally Posted by gcextreme
No friday will be fine. Im only driving the truck back and forth to work which is less than a mile. Im doing brake pads and stuff this weekend on it. Plus its not my only vehicle i still have the red ranger. So no big hurry...just need it before i put the red one into storage for the winter..hopefully 2 weeks
|
I'll get it boxed up on Friday and send YA some pics in a pm and get a quote.
__________________
99 xlt, 5.0, torsion bars cranked, 4" body lift, 33" Goodyear Duratracs, 15x10 American racing 5 spoke rims, 2004 ranger edge seats, buggman LEDs in dash, Aussie locker in front, 8.8 with discs and mini spool in rear, blue led underglow.
|
11-03-2014, 05:58 PM
|
|
Sept. TOTM
|
|
Join Date: Jul 2011
Posts: 12,240
|
|
Re: 4.0 and 3.0 MAF
Sounds good...thanks man
__________________
1999 Ranger 3.0FFV-ExtCab-4x4- My 99 Build
1998 Ranger 3.0-ExtCab-4x4-PROJECT TRUCK- My 98 Build
GC-EXTREME GRAPHICS NEED CUSTOM DECALS, APPAREL, or GLASS MUGS?
Visit My Thread!
Custom Stuff, Great Quality, & Great Prices!
These Graphics ROCK!
Buggman LEDS & GC-Extreme Graphics Joint Venture Mod Products Coming Soon!
Are you READY?!
|
11-03-2014, 06:04 PM
|
|
Danger 5.0
|
|
Join Date: Mar 2013
Posts: 1,308
|
|
Anything I can do to help! I'll have a bunch more 3.0 parts too if you or anyone Else is looking. All motor parts, block is junk and trans is sold.
__________________
99 xlt, 5.0, torsion bars cranked, 4" body lift, 33" Goodyear Duratracs, 15x10 American racing 5 spoke rims, 2004 ranger edge seats, buggman LEDs in dash, Aussie locker in front, 8.8 with discs and mini spool in rear, blue led underglow.
|
11-03-2014, 06:26 PM
|
|
Sept. TOTM
|
|
Join Date: Jul 2011
Posts: 12,240
|
|
Re: 4.0 and 3.0 MAF
Quote:
Originally Posted by Rangerdaddy
Anything I can do to help! I'll have a bunch more 3.0 parts too if you or anyone Else is looking. All motor parts, block is junk and trans is sold.
|
Got any valve covers? I have two 3.0Ls in my garage im eventually going to rebuild. But both are missing valve covers. Lol
Another member on here is doing a 5.0 swap and he was supposed to sell me his.. lol. I need two sets lol.
__________________
1999 Ranger 3.0FFV-ExtCab-4x4- My 99 Build
1998 Ranger 3.0-ExtCab-4x4-PROJECT TRUCK- My 98 Build
GC-EXTREME GRAPHICS NEED CUSTOM DECALS, APPAREL, or GLASS MUGS?
Visit My Thread!
Custom Stuff, Great Quality, & Great Prices!
These Graphics ROCK!
Buggman LEDS & GC-Extreme Graphics Joint Venture Mod Products Coming Soon!
Are you READY?!
|
11-03-2014, 06:27 PM
|
|
Danger 5.0
|
|
Join Date: Mar 2013
Posts: 1,308
|
|
Quote:
Originally Posted by gcextreme
Got any valve covers? I have two 3.0Ls in my garage im eventually going to rebuild. But both are missing valve covers. Lol Another member on here is doing a 5.0 swap and he was supposed to sell me his.. lol. I need two sets lol.
|
yup! Might be a bit for those... Still need to tear my engine down. Been working on getting the 5.0 out and the donor vehicle off to the jy. Prob a couple of weeks for em, but they are yours!
__________________
99 xlt, 5.0, torsion bars cranked, 4" body lift, 33" Goodyear Duratracs, 15x10 American racing 5 spoke rims, 2004 ranger edge seats, buggman LEDs in dash, Aussie locker in front, 8.8 with discs and mini spool in rear, blue led underglow.
|
Thread Tools |
Search this Thread |
|
|
Similar Threads
|
Thread |
Thread Starter |
Forum |
Replies |
Last Post |
4.0 maf help
|
f1wannabe |
General Tech |
12 |
05-30-2014 12:39 PM |
MAF help.
|
Double0RangerRubber |
4-Cylinder Tech |
6 |
01-19-2013 12:07 PM |
Maf help!
|
JoeNoble |
4.0 SOHC / 4.0 OHV Tech |
1 |
11-22-2012 10:34 AM |
MAF not on?
|
SebastianTH1 |
Electrical Tech |
0 |
08-24-2012 11:44 PM |
Maf?
|
beaujt |
4.0 SOHC / 4.0 OHV Tech |
0 |
05-10-2009 10:28 PM |
|
|