Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 11-22-2009, 09:28 AM
hpfreak08 hpfreak08 is offline
Like the Forums
 
Join Date: Oct 2009
Posts: 39
Thumbs down anyone know how to do the blinker mod?

a month or two ago i saw a tread posted on how to turn your side maker lights in to a functioning blinker but it alternated with the stock blinker.. anyone remember how to do this or if anyone could redirect me to the original post? thanks
Reply With Quote
  #2  
Old 11-22-2009, 09:45 AM
STL STL is offline
...............

 
Join Date: May 2009
Posts: 23,398
Default

Ya it's in the How To section

Click here
__________________
2005 Edge

Reply With Quote
  #3  
Old 11-22-2009, 10:05 AM
hpfreak08 hpfreak08 is offline
Like the Forums
 
Join Date: Oct 2009
Posts: 39
Default

yea the funny thing i found it after i posted it lol but ive already got it done, matter of fact i just finished the mod lol
Reply With Quote
  #4  
Old 11-22-2009, 10:20 AM
POWER-RANGER POWER-RANGER is offline
Ford Truck Driver
 
Join Date: Nov 2009
Posts: 93
Default

does this work on 00s where the turn signal is the big amber bar under the head light?
__________________
2000 3.0 xlt ranger
cherry bomb glass pack single side exit exhuast
"work in progress"
Reply With Quote
  #5  
Old 11-22-2009, 10:47 AM
STL STL is offline
...............

 
Join Date: May 2009
Posts: 23,398
Default

Yes it will work but the wiring is different just a tad

Cut the wires for your side marker light about 4-6 inches from the light-bulb housing. (a black and a brown wire) Wrap the ends that normally supply this bulb electricity with electrical tape and tuck them behind the header panel, making sure no wire is exposed to cause a short.

Cut the brown and green wire from the outer turn signal bulb as far away from the housing as possible.

Strip all the wires, for a total of 6 bare wires. (two from the side marker, 2 from the turn signal bulb-housing, and two which supply the turn signal electricity.)

Solder together all three brown wires from both lights. Secure with heat-shrink or electrical tape and ensure no wire or solder is exposed.

Solder together the two green wires with the black wire of the side marker. Secure with heat-shrink or electrical tape and ensure no wire or solder is exposed.

__________________
2005 Edge


Last edited by STL; 11-22-2009 at 10:49 AM.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Discuss How To: Blinker Mod STL How-To Submissions 259 06-11-2015 08:24 PM
left blinker smurphy Electrical Tech 4 11-15-2009 06:50 PM
Blinker Mod? STL Vehicle Snapshots 14 09-13-2009 06:18 PM
How To: Blinker Mod STL Exterior Guides 0 09-13-2009 11:56 AM