Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 06-02-2011, 05:18 PM
Joe v Joe v is offline
Learning to use the forums
 
Join Date: Jun 2011
Posts: 1
Question 1992 ranger 2.3l 5speed

does not start needs magnetic strip that fits on brake pedal switch can you use a resister to wire across the brake switch if so what ohm should i use
Reply With Quote
  #2  
Old 06-02-2011, 05:37 PM
Gumcrew2 Gumcrew2 is offline
Ford Tough
 
Join Date: Feb 2011
Posts: 287
Default Re: 1992 ranger 2.3l 5speed

Could you be a little more vague?????!!! lol

If your asking about the brake light switch, mounted where the pedal meets the pushrod for the master cylinder. It has nothing to do with the truck starting. It just turns on the brake lights, that's it.
__________________
'83 Ford Ranger 2.3L 4Spd, Dual Tanks, 195/60R15's, Welded Rear End TOTALLED AT 483,211 MILES
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
1990 ranger 2.3l 5speed brhodes 4-Cylinder Tech 1 05-22-2011 03:10 PM
1990 ranger 2.3l 5speed fuel pump etc. brhodes Electrical Tech 2 05-20-2011 09:49 PM
1990 ranger 2.3l 5speed brhodes Introduce Yourself 9 05-20-2011 05:59 AM
2000 Ford Ranger Supercab 2wd 3.0l 5speed mpg's 3LRanger 3.0 Vulcan Tech 14 04-13-2011 11:45 AM
2000 Ford Ranger 2.5L 5speed won't start unless given gas then dies when let off? rangerbaric2003 4-Cylinder Tech 2 12-19-2008 09:05 AM