Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 05-24-2011, 05:12 PM
Ahum Ahum is offline
1985: A very good year!..
 
Join Date: Feb 2011
Posts: 98
Default WANTED: 1985 Ranger Idle speed controller module 4CF 2.0 Carbed

Looking for Idle speed controller. This is a module found on the passinger side, mounted on the wheel plastic insert covers, under the hood. It is a electronic module about 8 inches square, three bolts holding it with a large connector in the middle.

These were on 1985 and 1986. Others I don't know. The number on the lable of the module is: E5TF-9L513-AA. The Ford part number is: E5TZ-9L513-A. If you have one of these I can use it.

I diden't see a wanted section, for parts and such. So I figured this is the right heading for this thread. The vehicle this comes from should NOT have the black tarish area disturbed. Or the tar starting to run out of the square holder.

If you have one, from a old ranger, or a parts truck, or just sitting on the shelf. Please let me know. I think my engine will run better with this module replaced.

Thanks.
__________________
1985 A very good year. Made in the USA, that's why it's running today!. It's a antique, although some people don't think it's old enough to be a "Antique"..
Reply With Quote
  #2  
Old 05-24-2011, 05:16 PM
klinger86 klinger86 is offline
Ford Ranger Driver
 
Join Date: Jan 2011
Posts: 2,970
Default Re: WANTED: 1985 Ranger Idle speed controller module 4CF 2.0 Carbed

when you post a thread in the classified section it has a selection for want to buy.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
2000 Ford Ranger 3.0l 5 speed idle problem 3LRanger General Ford Ranger Discussion 1 03-09-2011 07:13 PM
1985 Ranger Ruben85XL Introduce Yourself 16 02-19-2011 08:35 PM
carbed 2.3 to fuel injection? kevblev88 4-Cylinder Tech 0 02-06-2011 07:45 PM
adjust idle speed kilich 2.9 Liter Tech 1 01-04-2011 04:03 PM
Miss at idle speed 99 4.0 blueovalhawkeyefan 4.0 SOHC / 4.0 OHV Tech 2 12-25-2010 10:39 PM