My 6k HID lo/hi (all in one bulb) are stuck in high beams. The dash icon has a dimmed high beam, and when I flip high beams on they brighten up some. My lights are always stuck on high.

I just bought the 6k HID lo/hi, before I had 6k lo beams. One of the new ballast's do not work. So I'm using a ballast from my 6k lo beam.

The only difference of the two are the new ballast have 10a lin max. My 6k lo have a 5.5a lin max. Is this why my lights are stuck on high?

I have made sure I have good ground, and good connections. I also have after market headlight houseing's.

Did you fix the problem I am having the same problem

Sent from my ADR6400L using Tapatalk 2

__________________
2008 Ranger XLT 4cly 2.3l, 2wd Fabtech 5.5 Bastard psck 31x10.5r15 BFG All Terrains, Smoked tail lights and front corners, Hid Headlights, Dumped Flowmaster 40 series, Air box mod, CB Radio 5ft Firestick,Blue Led in cab, New Memphis speakers Kenwood amp and stereo
Soon To be 8.8 4:10 ls Swap

Couple of things, check you grounds!

Are you using a proper relay harness?

Check the pin out of your headlights you may have to switch some of the pins depending on how your HIDs interface with the factory wiring.

__________________
Supercharged and DBR long travel 2003 FX4 on 305/70R16 MTRs, Torsen LS FR ECTED RR 4.56 Yukons with cobra brakes, lots of expo parts and other mods

Build thread http://www.fordrangerforum.com/proje...cue-truck.html

Support Search and Rescue ... GET LOST!

my grounds are good checked those. The relay came with the hids so that should be good and I have already changed the pins around and that didn't help.

Sent from my ADR6400L using Tapatalk 2

__________________
2008 Ranger XLT 4cly 2.3l, 2wd Fabtech 5.5 Bastard psck 31x10.5r15 BFG All Terrains, Smoked tail lights and front corners, Hid Headlights, Dumped Flowmaster 40 series, Air box mod, CB Radio 5ft Firestick,Blue Led in cab, New Memphis speakers Kenwood amp and stereo
Soon To be 8.8 4:10 ls Swap

so youre saying youve never gotten them to work right? Its the pin out im 99.99 percent sure you have something connected incorrectly.

__________________
2010 Ranger XL Reg. Cab 4 cyl... 5 speed manual... W/reverse.

Mods: 5% tint on rear window, JVC KDHDR40 Headunit, Kicker KS-68 speakers, Kicker TCVT102 (10TCVT102) Sub, JVC DRVN KSAX3102 Amp, JVC DRVN KSAX3101D mono amp, Ford black rubber mat, White LED license plate lights. Added 6000k HID Fogs, 6000k Digital HID Heads.

This isn't gramhar skool so dont cry and whine about spelling.

When I switched the pins around that didn't fix the problem. It was still stuck on high beams.

Sent from my ADR6400L using Tapatalk 2

__________________
2008 Ranger XLT 4cly 2.3l, 2wd Fabtech 5.5 Bastard psck 31x10.5r15 BFG All Terrains, Smoked tail lights and front corners, Hid Headlights, Dumped Flowmaster 40 series, Air box mod, CB Radio 5ft Firestick,Blue Led in cab, New Memphis speakers Kenwood amp and stereo
Soon To be 8.8 4:10 ls Swap