|
01-30-2011, 04:15 PM
|
|
5.0 ranger!!
|
|
Join Date: Jan 2010
Posts: 307
|
|
Code P0176
i got code p0176 Fuel composition sensor circuit when the trucks cold it will start run for a few then stall and wont start agen for abought 30s then it will start agen some times does it a cupple times once it worms up it runs fine anyideas?
__________________
2000 ford ranger 5.0/4r70w/np208 gt40p heads, mustang T/B and injectors, true dual flowmaster 10s no cats, 4r70w auto with trans go aod hd 2 shift kit and full manual valve body. 4x4,locked 9in rear,locked coil dana 44 front with 4.10s , 8in lift springs, 3in bl. on 34/10.5s,or 38-15-15s 8000k hids, 7in flip out dvd player, 2 kicker 12s and 2400watt amp
www.f150nation.com
|
Register and never see these ads again. |
|
01-31-2011, 10:38 PM
|
|
5.0 ranger!!
|
|
Join Date: Jan 2010
Posts: 307
|
|
Re: Code P0176
anyone?
__________________
2000 ford ranger 5.0/4r70w/np208 gt40p heads, mustang T/B and injectors, true dual flowmaster 10s no cats, 4r70w auto with trans go aod hd 2 shift kit and full manual valve body. 4x4,locked 9in rear,locked coil dana 44 front with 4.10s , 8in lift springs, 3in bl. on 34/10.5s,or 38-15-15s 8000k hids, 7in flip out dvd player, 2 kicker 12s and 2400watt amp
www.f150nation.com
|
01-31-2011, 10:40 PM
|
|
Get Lifted.
|
|
Join Date: Nov 2010
Posts: 6,402
|
|
Re: Code P0176
is your truck flex fuel?
__________________
YZ the way to be!
The Brotherhood!
Mods to come: Camburg entry 6.0 system. FiberwerkX Fenders and bedsides. Tube bumper.
R.I.P. Jeff Ashton. 1992-2011
|
01-31-2011, 10:51 PM
|
|
5.0 ranger!!
|
|
Join Date: Jan 2010
Posts: 307
|
|
Re: Code P0176
yes it is
__________________
2000 ford ranger 5.0/4r70w/np208 gt40p heads, mustang T/B and injectors, true dual flowmaster 10s no cats, 4r70w auto with trans go aod hd 2 shift kit and full manual valve body. 4x4,locked 9in rear,locked coil dana 44 front with 4.10s , 8in lift springs, 3in bl. on 34/10.5s,or 38-15-15s 8000k hids, 7in flip out dvd player, 2 kicker 12s and 2400watt amp
www.f150nation.com
|
01-31-2011, 10:56 PM
|
|
Get Lifted.
|
|
Join Date: Nov 2010
Posts: 6,402
|
|
Re: Code P0176
Look under the truck near the transfer case directly below the driver seat and you will find a 40-pin connector. It doesn't like water and has a habit of shorting all sorts of things together that relate to the rear half of the truck. Use a 10mm socket or wrench to open up the connector and you may find water/dirt/corrosion inside. Clean and dry with electrical contact cleaner and reassemble. If that doesnt work you need to replace the flex-fuel sensor.
__________________
YZ the way to be!
The Brotherhood!
Mods to come: Camburg entry 6.0 system. FiberwerkX Fenders and bedsides. Tube bumper.
R.I.P. Jeff Ashton. 1992-2011
|
01-31-2011, 11:53 PM
|
|
5.0 ranger!!
|
|
Join Date: Jan 2010
Posts: 307
|
|
Re: Code P0176
well ill have to check that out i sure hope thats what it is the sencers like 800
__________________
2000 ford ranger 5.0/4r70w/np208 gt40p heads, mustang T/B and injectors, true dual flowmaster 10s no cats, 4r70w auto with trans go aod hd 2 shift kit and full manual valve body. 4x4,locked 9in rear,locked coil dana 44 front with 4.10s , 8in lift springs, 3in bl. on 34/10.5s,or 38-15-15s 8000k hids, 7in flip out dvd player, 2 kicker 12s and 2400watt amp
www.f150nation.com
|
08-13-2015, 09:33 AM
|
Learning to use the forums
|
|
Join Date: Aug 2015
Posts: 2
|
|
Re: Code P0176
Did you see this post if you haven't fixed it already?
p0176
A cheaper fix is to get one of those dspelectronics.biz modules for $100.
|
08-13-2015, 09:35 AM
|
|
No wire hangers, ever!
|
|
Join Date: Jun 2010
Posts: 10,362
|
|
Re: Code P0176
Quote:
Originally Posted by max1984
Did you see this post if you haven't fixed it already?
|
Lets keep an eye on post dates please...this was from 2011.
|
Thread Tools |
Search this Thread |
|
|
Similar Threads
|
Thread |
Thread Starter |
Forum |
Replies |
Last Post |
OBD code 53
|
88 for fun |
2.9 Liter Tech |
2 |
02-08-2011 09:21 PM |
Airbag code
|
mhtranger |
Electrical Tech |
0 |
12-03-2010 03:44 PM |
Transmission code?
|
deerman2701 |
Drivetrain Tech |
3 |
08-23-2010 11:54 AM |
1309 Code help
|
hunt4elk |
General Tech |
0 |
02-10-2010 05:38 PM |
trouble code
|
Fordguy52 |
4-Cylinder Tech |
8 |
01-25-2010 01:40 PM |
|
|