Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > Ford Ranger Technical > Electrical Tech
Forgot Password? Join Us!


Reply
 
LinkBack Thread Tools Search this Thread

  #1  
Old 01-20-2011, 10:59 AM
Learning to use the forums
 
Join Date: Jan 2011
Posts: 14
Default 2004 Ford Ranger Ignition wiring diagram?

Hey everyone. So I just bought a Viper 5901 Alarm/remote start and I'm getting ready to put it in. It's not a very complex job for I have wired many things before but it would be VERY nice if I had an Ignition or better yet overall wiring diagram for the remote start. Any input is appreciated.
Reply With Quote
  #2  
Old 01-20-2011, 11:56 AM
Banned
 
Join Date: Mar 2010
Posts: 14,067
Default Re: 2004 Ford Ranger Ignition wiring diagram?

Not sure if this is what you need but its a start
2004 Ford Ranger

WIRE COLOR WIRE LOCATION

12V YELLOW Ignition harness

STARTER RED/LT. BLUE Ignition harness

IGNITION LT. GREEN/PURPLE Ignition harness

ACCESSORY GRAY/YELLOW Ignition harness

SECOND ACCESSORY BLACK/LT. GREEN Ignition harness

POWER LOCK (-) PINK/YELLOW In Large Black Connector At Fuse Box In

Passenger Kick Panel

POWER UNLOCK (-) PINK/LT. GREEN In Large Black Connector At Fuse Box In

Passenger Kick Panel

The module controlling the factory power door locks shuts down to conserve power. When installing a system with keyless entry, you must

hook up dome light supervision and program the system to double-pulse the unlock wire to “wake up” the module and operate the door locks.

PARKING LIGHTS (+) BROWN In Brown Connector At Fuse Box In

Passenger Kick Panel

DRIVER DOOR TRIGGER (-) YELLOW/BLACK In Large Black Connector At Fuse Box In

Passenger Kick Panel

PASSENGER DOOR TRIGGER (-) GRAY/RED In Large Black Connector At Fuse Box In

Passenger Kick Panel

DOME SUPERVISION (+) BLACK/LT.BLUE In Gray Connector At Fuse Box In Passenger

Kick Panel

TACHOMETER NOT RED Ignition Coil

BRAKE WIRE (+) LT. GREEN At Brake Pedal Switch Or Harness In Driver’s

Kick Panel

HORN TRIGGER (-) DK.BLUE or YELLOW/LT. GREEN Harness At Steering column

LEFT FRONT WINDOW UP WHITE/BLACK At Driver Window Motor Inside Door

LEFT FRONT WINDOW DOWN RED At Driver Window Motor Inside Door

RIGHT FRONT WINDOW UP WHITE/YELLOW Harness In Driver’s Kick From Driver Door

RIGHT FRONT WINDOW DOWN TAN/BLUE Harness In Driver’s Kick From Driver Door
This vehicle may be equipped with a factory Immobilizer system. This must be bypassed when installing a remote start system.
Reply With Quote
  #3  
Old 01-20-2011, 01:05 PM
Learning to use the forums
 
Join Date: Jan 2011
Posts: 14
Default Re: 2004 Ford Ranger Ignition wiring diagram?

Well I was hoping for a drawn diagram if at all possible. Ill give this a shot though thanks for the info. If anyone else has something please feel free to add on.
Reply With Quote
  #4  
Old 01-20-2011, 01:47 PM
Learning to use the forums
 
Join Date: Jan 2011
Posts: 14
Default Re: 2004 Ford Ranger Ignition wiring diagram?

hey so just checking but are you sure about this info? I've gone through this harness about 4 times and theres no Green/purple wire anywhere..? its one wire correct?
Reply With Quote
  #5  
Old 01-20-2011, 01:51 PM
STL STL is offline
...............
 
Join Date: May 2009
Posts: 22,132
Default Re: 2004 Ford Ranger Ignition wiring diagram?

What engine does the truck have?
__________________
2005 Edge

Reply With Quote
  #6  
Old 01-20-2011, 01:55 PM
Learning to use the forums
 
Join Date: Jan 2011
Posts: 14
Default Re: 2004 Ford Ranger Ignition wiring diagram?

its a 4.0 V6 4x4 5 speed XLT
Reply With Quote
  #7  
Old 01-20-2011, 01:58 PM
STL STL is offline
...............
 
Join Date: May 2009
Posts: 22,132
Default Re: 2004 Ford Ranger Ignition wiring diagram?

Create a signature to save time on answers ==>http://www.fordrangerforum.com/site-...signature.html



__________________
2005 Edge


Last edited by STL; 01-20-2011 at 02:07 PM.
Reply With Quote
  #8  
Old 01-20-2011, 02:11 PM
Learning to use the forums
 
Join Date: Jan 2011
Posts: 14
Default Re: 2004 Ford Ranger Ignition wiring diagram?

Alright got the signature done. And i was looking specifically for the harness itself. The text description was good but if you look on the front of the harness plug each terminal is numbered. I was wondering if anyone had a "key" to what the wire the numbers represents. Make sense?
Attached Images
File Type: jpg 1295561216294.jpg (57.6 KB, 11 views)
__________________
2004 Ford Ranger 4X4, 5 speed, 4.0 V6
Reply With Quote
  #9  
Old 01-20-2011, 02:16 PM
Learning to use the forums
 
Join Date: Jan 2011
Posts: 14
Default Re: 2004 Ford Ranger Ignition wiring diagram?

HAHA nevermind im a dumby! Wrong harness!!! I feel pretty stupid right about now.... haha thanks guys!
__________________
2004 Ford Ranger 4X4, 5 speed, 4.0 V6
Reply With Quote
  #10  
Old 01-20-2011, 02:16 PM
STL STL is offline
...............
 
Join Date: May 2009
Posts: 22,132
Default Re: 2004 Ford Ranger Ignition wiring diagram?

What connector is that you have a picture of?
__________________
2005 Edge

Reply With Quote
  #11  
Old 01-20-2011, 02:23 PM
Learning to use the forums
 
Join Date: Jan 2011
Posts: 14
Default Re: 2004 Ford Ranger Ignition wiring diagram?

It was just a big mistake on my part. I have never really messed with ignition things but I have wired numerous things. Now that I have the right part im good to go. Learn something new everyday...
__________________
2004 Ford Ranger 4X4, 5 speed, 4.0 V6
Reply With Quote
  #12  
Old 01-20-2011, 02:56 PM
Learning to use the forums
 
Join Date: Jan 2011
Posts: 14
Default Re: 2004 Ford Ranger Ignition wiring diagram?

Alright guys so Im a little stumped here. I have this harness for a Viper remote start system and there are 9 wires on it the 9 wires and their job are here:


➢ Heavy Gauge, 10-pin connector
There are 9 heavy gauge wires coming from the large 10-pin connector. They
are used to energize the ignition circuits in the vehicle. It is crucial to ensure that
these connections are capable of handling the current demands. For this reason,
Scotch-Locks, T-taps and other such connectors are strongly discouraged.

H3/1 PINK IGNITION 1 INPUT/OUTPUT
Connect this wire to the ignition wire in the vehicle. This wire not only supplies
voltage for the ignition line in the vehicle, it is also the ignition feed for the
security system.

H3/2 RED/WHITE (+) (30A) FUSED IGNITION 2 / FLEX RELAY INPUT 87
This wire is the polarity feed for the ignition 2/flex relay.

H3/3 ORANGE ACCESSORY OUTPUT
Connect this wire to the accessory wire that powers the climate control system.

H3/4 VIOLET STARTER OUTPUT
This wire hooks up to the starter side of the starter wire in the car. This wire is
also pin 30 of the onboard starter kill relay.

H3/5 GREEN STARTER INPUT
After cutting the starter wire connect the GREEN wire to the end going to the
ignition switch. This wire is pin 87a of the onboard starter kill relay. 2008 Directed Electronics. All rights reserved. 23

H3/6 RED (+) (30A) FUSED IGNITION 1 RELAY INPUT
This wire is the polarity feed for the Ignition1 relay.

H3/7 PINK/WHITE (+) IGNITION 2 FLEX RELAY OUTPUT
This wire is factory programmed as Ignition 2 and can be programmed as a
2nd accessory or as a 2nd starter.

H3/8 PINK/BLACK 87a OF IGNITION 2 FLEX RELAY
This wire is used when an ignition switch isolation on the vehicle is necessary
This is common on Toyota and Nissan's which require the use of Tech Tip document #1077. (See Menu #3, Feature #8, for programming options)

H3/9 RED/BLACK (+) (30A) FUSED ACCESSORY/STARTER RELAY INPUT
This wire is the polarity feed to the accessory and starter relay

SO my question is where the heck are the wires that are suposed to be on the ignition harness at to run all 9 of these wires? any input?
__________________
2004 Ford Ranger 4X4, 5 speed, 4.0 V6
Reply With Quote
  #13  
Old 01-20-2011, 04:45 PM
Learning to use the forums
 
Join Date: Jan 2011
Posts: 14
Default Re: 2004 Ford Ranger Ignition wiring diagram?

Alright guys so Im a little stumped here. I have this harness for a Viper remote start system and there are 9 wires on it the 9 wires and their job are here:


➢ Heavy Gauge, 10-pin connector
There are 9 heavy gauge wires coming from the large 10-pin connector. They
are used to energize the ignition circuits in the vehicle. It is crucial to ensure that
these connections are capable of handling the current demands. For this reason,
Scotch-Locks, T-taps and other such connectors are strongly discouraged.

H3/1 PINK IGNITION 1 INPUT/OUTPUT
Connect this wire to the ignition wire in the vehicle. This wire not only supplies
voltage for the ignition line in the vehicle, it is also the ignition feed for the
security system.

H3/2 RED/WHITE (+) (30A) FUSED IGNITION 2 / FLEX RELAY INPUT 87
This wire is the polarity feed for the ignition 2/flex relay.

H3/3 ORANGE ACCESSORY OUTPUT
Connect this wire to the accessory wire that powers the climate control system.

H3/4 VIOLET STARTER OUTPUT
This wire hooks up to the starter side of the starter wire in the car. This wire is
also pin 30 of the onboard starter kill relay.

H3/5 GREEN STARTER INPUT
After cutting the starter wire connect the GREEN wire to the end going to the
ignition switch. This wire is pin 87a of the onboard starter kill relay. 2008 Directed Electronics. All rights reserved. 23

H3/6 RED (+) (30A) FUSED IGNITION 1 RELAY INPUT
This wire is the polarity feed for the Ignition1 relay.

H3/7 PINK/WHITE (+) IGNITION 2 FLEX RELAY OUTPUT
This wire is factory programmed as Ignition 2 and can be programmed as a
2nd accessory or as a 2nd starter.

H3/8 PINK/BLACK 87a OF IGNITION 2 FLEX RELAY
This wire is used when an ignition switch isolation on the vehicle is necessary
This is common on Toyota and Nissan's which require the use of Tech Tip document #1077. (See Menu #3, Feature #8, for programming options)

H3/9 RED/BLACK (+) (30A) FUSED ACCESSORY/STARTER RELAY INPUT
This wire is the polarity feed to the accessory and starter relay

SO my question is where the heck are the wires that are suposed to be on the ignition harness at to run all 9 of these wires? any input?
__________________
2004 Ford Ranger 4X4, 5 speed, 4.0 V6
Reply With Quote
  #14  
Old 01-20-2011, 10:09 PM
Like the Forums
 
Join Date: Jan 2011
Posts: 33
Default Re: 2004 Ford Ranger Ignition wiring diagram?

Better take it to an alarm shop!!!!!!!
__________________
2011 mustang/66 mustang//not bad ass, but bad enough.
Reply With Quote
  #15  
Old 01-21-2011, 10:53 PM
Learning to use the forums
 
Join Date: Jan 2011
Posts: 14
Default Re: 2004 Ford Ranger Ignition wiring diagram?

No I got it all figured out but this is my last thing to do for the while instal. So the 12v constant is a yellow wire. Which one theres 4....?
Attached Images
File Type: jpg 1295672188314.jpg (78.7 KB, 11 views)
__________________
2004 Ford Ranger 4X4, 5 speed, 4.0 V6
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
2004 Ranger Edge Complete Full Color Wiring Diagram tinker000 Electrical Tech 16 10-23-2012 06:15 AM
Wiring Diagram for 1990 2.3 ranger? FlyingFatass Electrical Tech 1 11-01-2010 05:25 PM
2010 Ranger Power Lock Wiring Diagram techguy84 Electrical Tech 7 09-03-2010 09:29 AM
Where Can I Get A Free Diagram For Car Stereo Wiring In A 2004 Ford Ranger.? JULIAN X Audio / Video 4 08-08-2010 06:24 PM
Ranger wiring diagram PDF hunterranger Electrical Tech 1 03-19-2010 01:49 AM



Search Engine Friendly URLs by vBSEO 3.6.0 ©2011, Crawlability, Inc.