Yeah. But then when you add two more projectors in the picture, you will get even more help and visibility at night am I right? That and it will go real good together when both the heads and fogs are done.

__________________
Sunny
2002 Ford Ranger Edge Flex Fuel 2wd
LED Crazy!
Complete Pioneer Audio setup
5000k HID Projector retrofit and 3000k Fogs
Achilles Desert Hawk 255/45/20 with 20'' rims
Looking for a professional retrofitter? Send me a message!

Installed the HIDs tonight into the truck just to verify the aim, before I screw them down for the final mount.



Lenses were not mounted on the lights, just the projectors mounted in the housings.

Checking the aim

__________________
Looking for a professional retrofitter to add HIDs or LEDs to your Ranger? PM me if your looking to have work done, and have cash to spend.

Not feeling the white headlights. Maybe they will look better with the lenses mounted. Everything else so far is awesome.

Can't wait for the write up ^_^

__________________
Sunny
2002 Ford Ranger Edge Flex Fuel 2wd
LED Crazy!
Complete Pioneer Audio setup
5000k HID Projector retrofit and 3000k Fogs
Achilles Desert Hawk 255/45/20 with 20'' rims
Looking for a professional retrofitter? Send me a message!

im doin all black except leaving the signal part chrome for the bulbs kinda like tylers

__________________
"I thought this was America!"-Randy Marsh

2003 fx4 4.10, maxed tbars, 5000k HIDS 3157 silverstar bulbs, expo ohc, alons mag light holder, 06+ tails, throttle cable mod, air box mod
360tag:BEEFS7A7US

subscribed. Awesome thread!!!

__________________
Schwinn Super-Sport, Nikon D90 ROLLED: 2001 Ford Ranger XLT Super Cab 4X4MODS
Buy my pictures at Imagekind!

Remember, the only reason I painted that white is because its hidden by the PCB, it did not matter because it doesn't show.

__________________
Looking for a professional retrofitter to add HIDs or LEDs to your Ranger? PM me if your looking to have work done, and have cash to spend.

oh i would have done the exact same thing cuz you dont want the PCB to show

__________________
"I thought this was America!"-Randy Marsh

2003 fx4 4.10, maxed tbars, 5000k HIDS 3157 silverstar bulbs, expo ohc, alons mag light holder, 06+ tails, throttle cable mod, air box mod
360tag:BEEFS7A7US

http://www.youtube.com/user/djturboj.../0/B7zRriYMG90

Circuit to control LEDs built and works!

__________________
Looking for a professional retrofitter to add HIDs or LEDs to your Ranger? PM me if your looking to have work done, and have cash to spend.

Circuit for LED Voltage control has been fully assembled and housed in aluminum sealed box with heat sinks mounted.

I also installed some really neat splash-proof molex harnesses so everything will be plug and play. (these aren't cheap)

__________________
Looking for a professional retrofitter to add HIDs or LEDs to your Ranger? PM me if your looking to have work done, and have cash to spend.

Some testing photos of the turnsignals compared to the stock incandescent bulbs.

Factory (left of photo) my LumiLEDs board (right of photo)


Reflection off the ground with the LEDs


View from afar

__________________
Looking for a professional retrofitter to add HIDs or LEDs to your Ranger? PM me if your looking to have work done, and have cash to spend.

holly hell batman those are bright

__________________
"I thought this was America!"-Randy Marsh

2003 fx4 4.10, maxed tbars, 5000k HIDS 3157 silverstar bulbs, expo ohc, alons mag light holder, 06+ tails, throttle cable mod, air box mod
360tag:BEEFS7A7US

also much more color than regular amber bulbs.

I think they look like actual traffic lamps installed in my headlights from far away.

I think I'm going to have people asking me "did you take the yellow light out of a traffic light and install it in your headlights?"

__________________
Looking for a professional retrofitter to add HIDs or LEDs to your Ranger? PM me if your looking to have work done, and have cash to spend.

Are there any laws regarding the amber light? For example can you change color?

__________________
2006 Ranger FX4 Level 2
33x12.5 Hankook Dynamic M/T, Ion Aluminum Alloy 15x10 -4inch offset,Front winch bumper, superwinch ep9.0, 3" B/L, Torsion Crank, Chrome Bed Bar, 2 x 100 watt offroads, 6000k HID Heads/Fog(s), Pioneer H.U., 12" Jackhammer, Alpine mrp 500,train horn, whelen pa/siren
Mods
Headlight, Fog, Airbox, Blue led interior(not gauge cluster yet), blue led l/p, blue led side markers, color match skid plates
To come
sliders, suspension lift, rear bumper, tire carrier, tailgate

Anti-Ricer law says the lights should be amber. That's good enough for me.

__________________
Looking for a professional retrofitter to add HIDs or LEDs to your Ranger? PM me if your looking to have work done, and have cash to spend.