 |
 |
 |
|
#1
07-04-2009, 12:55 PM
|
||||
|
||||
AirBag
My airbag light on the dash keeps coming on and blinking, then going away for a bit, then coming back and doing it again... I turned the Passenger airbag off and then turned it back on again and no luck. It still blinks and it does this for about a week and then goes away... then comes back a few months later. I don't have a scanner and can't get a hold of one. Any ideas???
I'm stumped at what it is... Any Info would be much appreciated! Thanks! 
|
!
 |
 |
| Register and never see these ads again. | |
|
|
|
|
|
#2
07-04-2009, 01:20 PM
|
||||
|
||||
|
i've been doing some research and i think its a Code 27 which seems to be typical for Ford Motor Co. Cuz I found a forum on the internet that was addressing the same problem that i have currently. it was pretty neat.
|
|
|
|
|
|
#3
07-04-2009, 02:19 PM
|
||||
|
||||
|
This is usually caused by a burned out bulb in the PAD switch. Ford wants you to buy a $200 switch assembly to fix it but the bulb can be replaced for a couple of bucks if you can solder.
HOW TO: Airbag light (Code 2-7) - ranger forums .com
__________________
2003 FX4 Level II, Supercharged 5.0L V8, Headers, Duals BW4406 manual transfer case, Aussie Locker, Torsen L/S, 4.10's Bilstein 7100 rezzies, Cadillac/Mustang rear discs, Duff traction bars Keypad Entry, Lock LEDs, ABS switch, sway bar discos Heated seats, Explorer EATC, Trip Computer and consoles 2003 XLT 2.3L M5OD-R1 reg cab, 2011 Taurus SEL, 2016 C-MAX Energi Plug-in Hybrid
|
|
|
|
|
|
#4
07-11-2009, 02:02 AM
|
||||
|
||||
|
ok so i had some free time at work the other day and i took the airbag switch assembly apart, cleaned out the connections and cleaned out the inside and wipe the circuit board with a microfiber cloth.... the airbag light on the dash went away.. however, today it came back, only now its solid (not blinking like it was before)..
My "off" light isn't burnt out because it does its business when i go to start the truck... SO, having said that, Any Idea's...? Thanks in Advance...!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
|
|
|
 |
«
Previous Thread
|
Next Thread
»
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 01 ranger passenger airbag cover | 4evermodding | Interior Tech | 4 | 06-11-2009 10:19 PM |
| if you have a 2000 ford ranger and the airbag has deployed do you have to replace... | jimmydean.6969 | General Ford Ranger Discussion | 1 | 12-22-2008 05:44 PM |
|
|
 |
|
|
 |
 |
 |
