Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 11-21-2019, 11:20 AM
bubba1234 bubba1234 is offline
Learning to use the forums
 
Join Date: Mar 2019
Posts: 4
Default EGR Valve

Got Engine light on P 1400 replaced the EGR came back on again
__________________
My name is Jim...have 2001 4.0 ..Live in Bristol In...runs good after doing a Scan and found a couple things...Its obviously old so will need help sooner or later.(sooner) probably thanks
Reply With Quote
  #2  
Old 11-22-2019, 03:48 PM
sheltonfilms sheltonfilms is offline
Junkyard Dog
 
Join Date: Sep 2010
Posts: 1,903
Default Re: EGR Valve

This code means the EGR sensor is feeding back a low voltage (less than 0.195 volts).

The DPFE sensor I think on the 4.0 is mounted on the driver side intake manifold under the idle air control valve. If it's original it will be rectangular and made of aluminum. It will have a 3 wire connector and two hoses running to the bottom of it.

Need to confirm voltage going into the sensor.

Pin 1 should be Brown and White and should show 5.0 volts with key on.
Pin 2 should be ground (0 volts) and Grey and Red wire.

Once those two are confirmed make sure the connector is connected and back probe pin 3 (Brown/orange) and turn the key on. If it is less than 0.195 volts then the sensor is bad.

This is an immediate code. If malfunction occurs more than 4 seconds on startup this code appears. So it is quick to confirm the repair.
__________________
Automotive Electronics Engineer
2000 XLT 2.5L A/T
Mods:
Explorer OHC
Explorer Autodim Mirrors w/ Autolamps
Explorer Sport White Face Gauges
Reply With Quote
  #3  
Old 11-24-2019, 10:43 AM
bubba1234 bubba1234 is offline
Learning to use the forums
 
Join Date: Mar 2019
Posts: 4
Default Re: EGR Valve

Replaced DPE no more Egine LIght ....Thanks Jim
__________________
My name is Jim...have 2001 4.0 ..Live in Bristol In...runs good after doing a Scan and found a couple things...Its obviously old so will need help sooner or later.(sooner) probably thanks
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Bad Valve? Mailman1 4.0 SOHC / 4.0 OHV Tech 2 02-26-2018 09:15 PM
Egr valve joshmos 4-Cylinder Tech 5 03-05-2015 10:17 PM
'91 ABS dump valve/ brake proportioning valve? Marguerite88 4-Cylinder Tech 2 03-24-2014 06:42 PM
its egr valve i think? HELP!!!! rangerme 3.0 Vulcan Tech 3 04-17-2011 03:26 PM
For Sale: ranger 4.0 headgasket valve cover gasket header gasket & viton valve stem seals $10+ talkforparts Engine & Drivetrain Parts 0 07-20-2010 12:57 PM