2006 Hight Beams stuck on
So for over a year now I've lived without high beams because I've been too lazy to stick my head in upside down and check the fuses. I finally did today and discovered that the fuse was MISSING (probably from the PO).
So I put a new fuse in and VOILA! High beams!
Only problem is that they won't turn off. Even when the headlights are turned off...
So, I suspect this is either a stuck relay or more likely a bad multi-function switch.
My question for y'all is this:
In a normally functioning '06 Ranger (4.0 Auto), will pulling back on the multifunction switch, even when the lights are turned off, still flash the brights?
If so, then I think I just need to replace that switch, which I suspect is why the PO pulled the fuse...
|