Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 11-14-2018, 06:02 AM
marvin9738 marvin9738 is offline
Learning to use the forums
 
Join Date: Nov 2018
Posts: 1
Default electric help

Hello, I have a 2001 ford ranger edge W/4.0ltrnew starter, battery, solenoid , and start switch in column no start just solenoid click is my batt positive cable all that is left???? HELP a vet
Reply With Quote
  #2  
Old 11-14-2018, 07:26 AM
Dirtman Dirtman is offline
Ford Motor Co
 
Join Date: Jul 2018
Posts: 160
Default Re: electric help

Ground wires are more prone to failure than positive cables in my experience. But you also need to check the starter fuse and relay. Just because the relay clicks doesn't mean its working. Also very common to get faulty elelectonis components from auto parts stores because they are generally remanafactured junk. This is why its never a good idea to just throw a bunch of parts at it before diagnosing the exact point of failure.

I would start by testing the fuse and relay, then check the ground and positive cable and then start looking over the new parts mostly the starter and selenoid. Ive had times where I went through several "new" starters from parts stores before one worked. NEVER assume a new part is good.

Check the battery voltage too, sometimes they simply are not charged fully from sitting around a dusty parts warehouse.

Thank you for your service
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Electric fan dev199505 Drivetrain Tech 0 10-13-2015 12:30 PM
Electric fan atrain8222 General Tech 3 06-24-2014 09:29 AM
No electric Nothing but Fords Off Topic 3 01-03-2012 08:34 AM
Electric Fan? 97GreenXLT 4-Cylinder Tech 0 07-11-2011 01:43 AM
Electric help AGAIN RoadDawg Electrical Tech 8 02-14-2011 01:17 PM