Re: Wiring harness behind passenger kick panel
Those are for the Inertia Fuel Shut-0ff Switch. The wires have been cut, taking the IFSS out of the circuit. Normally, there would be continuity from one wire to the other through that switch to allow voltage to the Fuel Pump.
If the truck will run now with those wires cut, then there is some additional butchery elsewhere to make that possible.
__________________
2003 FX4 Level II, Supercharged 5.0L V8, Headers, Duals
BW4406 manual transfer case, Aussie Locker, Torsen L/S, 4.10's
Bilstein 7100 rezzies, Cadillac/Mustang rear discs, Duff traction bars
Keypad Entry, Lock LEDs, ABS switch, sway bar discos
Heated seats, Explorer EATC, Trip Computer and consoles
2003 XLT 2.3L M5OD-R1 reg cab, 2011 Taurus SEL, 2016 C-MAX Energi Plug-in Hybrid
|