Re: Blower motor speed control switch
Did you replace the connector when you replaced the resistor? I'm amazed you got it off they are usually fused to the resistor I've done 3 in the past year and none of them were usable.
Plus those are the only 2 things besides wire and the motor in the circuit. The motor works on high so it works. Resistors and pig tails for "that one" usually come together. Be careful splicing the wires because they changed colors every production month (seemed like) and the tab positions are critical to proper operation.
Could you have pinched wires? Sure you could, I have never seen it but I'm sure it happens. More than likely your resistor connector (plug, harnass, pigtail, called several things) is in bad shape or if you did replace it you might have crossed 2 of the wires. I did once and had low, medium, high, high on the switch.
__________________
00 XLT 4WD XCSB 4.0 my new baby
00 XLT 2WD RCSB 5.0 swap in progress.
98 XLT 4WD XCSB 4.0 dead
99 EXPO donor motor for dead one and parts for the others.
Newest Ranger Forum
|