Quote:
Originally Posted by sheltonfilms
Need to do all the other measurements I stated and see what the results are.
Sent from my iPhone using Tapatalk
|
Shelton, let me just say thanks for helping me with this, I really appreciate it.
First, the image of the PCM connector I attached, the red and green connection is wrong (I have found the correct one now lol)
So, I may have found something interesting.
When I tested the resistance between pin 4 (white/light green) I got an infinite reading.
So i tested continuity between pin 4 and the first wiring harness there was a connection.
I then tested the same pin 4 from the first wiring harness to the PCM connection and it was infinite.
Do you think that's the problem?