I installed led tail lights and 3rd brake light. They have a resistor pack and do not have hyper flash. When the headlights are on, the lights flash fine. The problem is when the head lights are off the 3rd brake light and tail lights don't light up at the same time and the turn signal is short and fast. It's not hyper flash because the front flashers are working normal. Is this just product of off brand tail lights or something fixable.

I've run into this before with mechanical flashers with a mix of leds and regular bulbs. The power resistors are usually total shite and don't balance the load for crap. The power resistor is making the mechanical blinker happy but not the led. Just a guess

__________________
Matthew Vogt
96 Mazda B4000
4.0 4x4

If the women don't find you handsome, they should at least find you handy

Toss the resistors and get an EP27 flasher relay.

__________________
'98, 2wd, 2.5l, 5spd, regular cab step side
'07, 4X4, 4.0l, 5spd, super cab fleet side
'66 Ford Mustang 289, Auto
'81 Yamaha XS850 custom bobber
'91 Suzuki Marauder

Agreed

__________________
Matthew Vogt
96 Mazda B4000
4.0 4x4

If the women don't find you handsome, they should at least find you handy

Ok I'll try that.