Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 11-30-2016, 03:17 PM
horizon94 horizon94 is offline
Ford Ranger Driver
 
Join Date: Sep 2012
Posts: 569
Default Remote Start Install Assistance

Is there anyone on here who might be able to help me finish installing a remote start? I will make a more detailed post if anyone can help.

Sent from my SM-N910V using Tapatalk
__________________
2000 Ford Ranger XLT Ext. Cab - 4.0L - 4WD - 3" BL - AAL - Maxed T-Bars - 16" Mickey Thompson Classic Locks - 265/75/16 Cooper AT3s - 12" Power Acoustik Sub @ 1200 watts
Reply With Quote
  #2  
Old 12-01-2016, 11:24 AM
horizon94 horizon94 is offline
Ford Ranger Driver
 
Join Date: Sep 2012
Posts: 569
Default Re: Remote Start Install Assistance

So here's what I'm working with:


These are the directions that go along with the Xpresskit PKALL:




These are the directions that go along with the Avital 4103:




I also found these instructions online for a similar BullDog system:




Sent from my SM-N910V using Tapatalk

----------

I don't care about any of the anti-theft stuff so if I can ignore any of those wires that'll be a plus. The door locks I can finish myself (haven't had any time). I would like to know what remaining wires are necessary for the remote start.

1)My first question involves D2D. I believe that allows me to connect to an external computer and read information from the ranger. I don't want/need to do that so I'm assuming I can install without D2D. The directions say to cut the connector but then connect to a +12V source. Is that a constant source or ignition ON source?

2) I have no idea what any of the satellite harness connections mean or where those wires would be located.

3) I don't plan on using any of the anti-theft stuff so the only wire I would need on the 5-pin remote start harness would be the tachometer input, right?

4) I also have no idea where to start with the 9-pin Main Harness.



Sent from my SM-N910V using Tapatalk
__________________
2000 Ford Ranger XLT Ext. Cab - 4.0L - 4WD - 3" BL - AAL - Maxed T-Bars - 16" Mickey Thompson Classic Locks - 265/75/16 Cooper AT3s - 12" Power Acoustik Sub @ 1200 watts

Last edited by horizon94; 12-01-2016 at 11:49 AM.
Reply With Quote
  #3  
Old 12-01-2016, 12:01 PM
Jswifto Jswifto is offline
Ford Ranger Driver
 
Join Date: Dec 2013
Posts: 1,438
Default

Since your truck has pats system you are going to have to program the module and you need 2 keys to do it.
__________________
1999 Ranger 4.0 and extreme Snap-on tool fetish
Reply With Quote
  #4  
Old 12-01-2016, 12:34 PM
horizon94 horizon94 is offline
Ford Ranger Driver
 
Join Date: Sep 2012
Posts: 569
Default Re: Remote Start Install Assistance

Quote:
Originally Posted by Jswifto View Post
Since your truck has pats system you are going to have to program the module and you need 2 keys to do it.
The PKALL directions list the 2000 ranger as only needing one key. I have two keys but I guess we'll have to see what works.

Sent from my SM-N910V using Tapatalk
__________________
2000 Ford Ranger XLT Ext. Cab - 4.0L - 4WD - 3" BL - AAL - Maxed T-Bars - 16" Mickey Thompson Classic Locks - 265/75/16 Cooper AT3s - 12" Power Acoustik Sub @ 1200 watts
Reply With Quote
  #5  
Old 12-18-2016, 10:39 PM
horizon94 horizon94 is offline
Ford Ranger Driver
 
Join Date: Sep 2012
Posts: 569
Default Re: Remote Start Install Assistance

So I managed to get everything working with the help of a wise forum member. I will be posting some general instructions later on.

Jswifto, I only had to use one key to program the PKALL. Rangers made after July 2000 need 2 keys for the PKALL. I'm sure it's different for each type of bypass.

Sent from my SM-N910V using Tapatalk
__________________
2000 Ford Ranger XLT Ext. Cab - 4.0L - 4WD - 3" BL - AAL - Maxed T-Bars - 16" Mickey Thompson Classic Locks - 265/75/16 Cooper AT3s - 12" Power Acoustik Sub @ 1200 watts
Reply With Quote
  #6  
Old 12-18-2016, 10:57 PM
horizon94 horizon94 is offline
Ford Ranger Driver
 
Join Date: Sep 2012
Posts: 569
Default Re: Remote Start Install Assistance

The BARE-BONES wiring for the Avital 4103 One-way remote start and PKALL bypass requires only a few wires. The ones highlighted are needed at a bare minimum:




Sent from my SM-N910V using Tapatalk
__________________
2000 Ford Ranger XLT Ext. Cab - 4.0L - 4WD - 3" BL - AAL - Maxed T-Bars - 16" Mickey Thompson Classic Locks - 265/75/16 Cooper AT3s - 12" Power Acoustik Sub @ 1200 watts
Reply With Quote
  #7  
Old 12-18-2016, 11:35 PM
horizon94 horizon94 is offline
Ford Ranger Driver
 
Join Date: Sep 2012
Posts: 569
Default Re: Remote Start Install Assistance

If people are interested I will make a How to.

Sent from my SM-N910V using Tapatalk
__________________
2000 Ford Ranger XLT Ext. Cab - 4.0L - 4WD - 3" BL - AAL - Maxed T-Bars - 16" Mickey Thompson Classic Locks - 265/75/16 Cooper AT3s - 12" Power Acoustik Sub @ 1200 watts
Reply With Quote
  #8  
Old 12-19-2016, 08:16 AM
jd001 jd001 is offline
Like the Forums
 
Join Date: Sep 2016
Posts: 36
Default

Quote:
Originally Posted by horizon94 View Post
If people are interested I will make a How to. Sent from my SM-N910V using Tapatalk
If you wanted to take the time to do it, That would be great!
__________________
2001 Ford Ranger XL, 2.3l 5 speed, 2wd

Bedliner, Wade Bed Caps, Kobalt toolbox, John Deere Decal on rear glass otherwise completely stock
Reply With Quote
  #9  
Old 12-19-2016, 01:55 PM
horizon94 horizon94 is offline
Ford Ranger Driver
 
Join Date: Sep 2012
Posts: 569
Default Re: Remote Start Install Assistance

The how-to will be coming within the next two days.

Sent from my SM-N910V using Tapatalk
__________________
2000 Ford Ranger XLT Ext. Cab - 4.0L - 4WD - 3" BL - AAL - Maxed T-Bars - 16" Mickey Thompson Classic Locks - 265/75/16 Cooper AT3s - 12" Power Acoustik Sub @ 1200 watts
Reply With Quote
  #10  
Old 01-09-2017, 11:22 PM
horizon94 horizon94 is offline
Ford Ranger Driver
 
Join Date: Sep 2012
Posts: 569
Default Re: Remote Start Install Assistance

This is the link for the How-To:
How To: Remote Start
__________________
2000 Ford Ranger XLT Ext. Cab - 4.0L - 4WD - 3" BL - AAL - Maxed T-Bars - 16" Mickey Thompson Classic Locks - 265/75/16 Cooper AT3s - 12" Power Acoustik Sub @ 1200 watts
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Rear camera install assistance. Sloke Audio / Video 10 02-18-2013 01:48 PM
need assistance on an install rangerdange Interior Tech 0 10-18-2012 06:55 PM
02 fuse blown after remote start install Ls2slow Electrical Tech 4 01-01-2012 07:19 AM
Remote Start install. Grimvanni25 Interior Tech 16 12-15-2010 01:55 PM
Alarm/Remote Start/Keyless Entry Install chouillon General Tech 8 07-18-2010 06:23 PM