Re: crank no start.... please help
Dalton, when you replaced the ICM did you put all the screws in securely? They are grounds. Truck will not start if some are missing or loose.
As suggested I too would pull timing belt cover back and check it. You also can remove oil cap and see if cam is turning
__________________
2004 Ext Cab, 4WD, 4.0, Auto, 154k. (4.0 engine is out of a 2009 Ranger w/96k) ( as of 7/1/2017)
2004 Ranger, Ext Cab, 2WD, 3.0, 5 speed , 4WABS, crank windows, no cruise, Edge 116k.(6/5,2014) (SOLD).
1999 Ford Ranger, Reg Cab, 2.5, 5 speed, 2WD, no AC, 150k (SOLD).
Last edited by modelageek; 10-08-2015 at 11:47 AM.
|