Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Thread Tools Search this Thread

Old 05-16-2015, 06:47 PM
super ranger super ranger is offline
Learning to use the forums
Join Date: May 2015
Posts: 4
Default wipers work only on high

Just acquired a 97 ranger xlt my wipers only work on high, no wiper delay at all. Have had the low setting work twice after having them on high and turned them to low speed to stop them. When I hit the low speed setting, to my surprise on those 2 occasions they slowed and continued wiping until I switched to the delay setting then I only had high speed again. Was thinking the wiper motor, but if the motor was bad they most likely wouldn't work on high either is popular opinion. Have read about a speed control box near the column, not sure what its called? Also thought about replacing the multi switch, not exactly sure where to even start to be honest. If this is a common issue I figured maybe someone would know how to pinpoint the problem without replacing multiple parts and just guessing.
97' Ranger XLT 4.0 a/t 2 inch lift
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
Wipers Only Work On High Gauge Electrical Tech 5 05-05-2015 01:54 PM
93 Splash wipers only work on high PtownBubba Electrical Tech 0 03-04-2015 03:08 PM
Wipers only working in high. newbieranger88 Electrical Tech 3 12-20-2014 04:25 PM
wipers don't work, then work and won't shut off Dawjr Electrical Tech 3 11-20-2013 06:13 PM
Wipers Don't work. powderskier Introduce Yourself 4 11-21-2012 11:51 PM