Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 05-10-2014, 11:42 AM
DangerRanger9194 DangerRanger9194 is offline
Learning to use the forums
 
Join Date: Feb 2014
Posts: 1
Default help on complete wiring harness

Hi I'm new here and I have a 1991 ranger 2wd that had the 2.3 in it originally but I'm going with a 302 swap. Here's the issue, the guy who had it before did a total hack job on the wiring harness and I have no idea what to do with any of it. I'm doing a carburetor application so all I need is power for headlights turning lights etc... he even wacked the fuse box out of it..... Any kind of help to where I should st art would be very helpful. Thx
Reply With Quote
  #2  
Old 05-12-2014, 08:56 AM
charliebee charliebee is offline
Liking the Ford Ranger Forum
 
Join Date: Apr 2014
Posts: 25
Default

Fuse box it should have panel tells you where everything goes get power to it then run power to fuel pump head lights we'll switch then lights then whatever else you need just rewire it to the basics you need but don't just use electrical tape use the crimps clamps for wiring so it don't bust into flames if you can't figure it out buy a chiton book it will walk you threw it step by step
Reply With Quote
Reply

Tags
v8 swap, wiring

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Main wiring harness to tranny harness [I think] wiring help urgently needed DJDeV Electrical Tech 1 10-28-2012 07:12 PM
wiring harness dustint Electrical Tech 0 01-16-2012 03:31 PM
Want to Buy: 00 Ford Ranger 4.0L V6 Enigine Harness (complete) Dthecryptkeeper Engine & Drivetrain Parts 0 09-19-2011 06:23 AM
Want to Buy: Complete underhood wiring harness Big Mack Daddy Engine & Drivetrain Parts 1 07-09-2010 12:06 PM
Problem wiring the crankshaft position sensor on a 1998 2.5l to wiring harness of a 1 BENJAMINAUTO 4-Cylinder Tech 0 05-10-2010 11:23 AM