Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 02-27-2010, 09:47 AM
pushtrk99 pushtrk99 is offline
Learning to use the forums
 
Join Date: Jan 2010
Posts: 14
Default 1999 ranger rear end

I have been putting up with whining noise coming from rear end-plan on tackling job changing input shaft bearings & outputshaft bearings (already changed rear axle bearings and axles) Anybody got good diagrahm or procedure to do this job-After pulling axles it looks like two bolts on each side ring should come out then machine shop to press off old & press on new-Input shaft I can't tell if yoke is on taper or splined any help would be appreciated Rich
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Discuss How to: Rear disc brake conversion for stock Ranger rear end DangerRanger01 How-To Submissions 732 07-03-2017 03:19 PM
1999 ranger 4.0 pushtrk99 4.0 SOHC / 4.0 OHV Tech 1 01-29-2010 08:32 PM
How to: Rear disc brake conversion for stock Ranger rear end DangerRanger01 Engine/Drivetrain Guides 0 12-14-2009 08:37 PM
intake on a 1999 ranger Boe 3.0 Vulcan Tech 6 10-06-2009 02:56 PM
1999 Ranger no spark Help Please!!!! DanD General Ford Ranger Discussion 1 07-07-2009 09:34 AM